LiDAR 2018

LiDAR (Light Detection and Ranging) data collected in 2018 of the City of Vancouver and UBC Endowment Lands with an Area of Interest (AOI) covering a total of 134 square kilometers.​Data products include "bare earth" ground surface and of the upper most surface defined by vegetation cover, build​ings and other structures. Note ​​The 2018 LiDAR data is being utilized for initiatives including land management and planning including hazard assessment, floods, landslides, lava flows, and tsunamis), forestry, agriculture, geologic mapping, and watershed and river modelling and analysis. Data accessEach of the 181 polygons on the map or rows in the table provides corresponding link to the data in LAS format (zipped, file sizes range from 7KB to 950MB).AttributesPoint data was classified as:Unclassified;Bare-earth and low grass;Low vegetation (height <2m);High vegetation (height >2m);Water;Buildings; Other; andNoise (noise points, blunders, outliners, etc)​ Data currencyAerial LiDAR was acquired on August 27th and August 28th, 2018 and is ​current as of those dates.​
Data accuracyThe LiDAR data is positioned with an average density of 30 points per square metreSidelap: minimum of 60% in north-south and east-west directionsVertical accuracy: 0.18 metre (95% confidence level)Horizontal accuracy: 0.36 metre (95% confidence level Coordinate systemThe map of grid cells on this portal is in WGS 84 but the LiDAR data in the LAS files are in the following coordinate system:

Projection: UTM Zone 10 (Central Meridian 123 West)Hz Datum: NAD 83 (CSRS) 4.0.0.BC.1.GVRDVertical Datum:  CGVD28GVRD
Metro Vancouver Geoid (HTMVBC00_Abbbyn.zip) Websites for further information​City boundary dataset​