官方服务：
资源简介：
The folder contains the force-distance curves used for figure 4 (speed of 10 µm/s).
应用场景：
创建时间：
2019-01-01
相关数据集
Raw and Analysed through the Cyclic Indentation Method Data for HDPE, PMMA and PR520 epoxy polymers
This is the data to accompany the research article "Cyclic indentation method for polymers: instantaneous elastic modulus from reloading and energy analysis." by Dr Olga Smerdova, Dr Marina
doi.org70
An open-source and low-cost atomic force microscope controller for high-speed imaging
An open-source and low-cost AFM controller with a sinusoidal scanning function for high-speed scanning. The proposed AFM system achieved a scan rate of 55 line/s (9.3 s/frame for 512×512 pixels image)
Mendeley Data2024-03-27 更新60
Data for: "Processing outcomes of atomic force microscope tip-based nanomilling with different trajectories on single-crystal silicon"
The dataset contains numerical data to illustrate the relationship between the nanochannel depth and the applied normal load. The data can be read by using origin software.
DataCite Commons2021-07-15 更新50
Uniaxial tensile test data for AISI 316 L(N) IG material at 288 °C (first nominally repeat test)
Data created at the JRC during the Horizon 2020 MEACTOS project on mitigating environmentally assisted cracking through optimization of surface condition. This project has received funding from the Eu
DataCite Commons2022-03-18 更新70
