Parametric heat flux simulations for the insulation concept of the AM facade demonstrator "Building with Blocks"

The dataset consists of parametric heat flux simulations for the insulation concept of an additively manufactured (AM) facade element, “Building with Blocks” within the framework of TRR277 using Selective Paste Intrusion (SPI) and lightweight aggregates. The thermal simulations calculate the heat flux through a horizontal section of the element for varying parameters for an internal, hexagonal cell structure. The heat flux simulations are embedded in a simulation-based parametric design workflow (which is not part of this dataset) as performance feedback, using the software LBNL THERM 7.6 for heat transfer analysis and a parametric modeling algorithm for creating the parametric geometry (Rhino3D and Grasshopper) and preparing the parametric simulations (Ladybug Tools). The data is structured in one folder, consisting of the simulation files for each parameter set (125 variants), one folder with image data showing the resulting heat flux and a table listing the corresponding parameters, and additionally a selection of three variants, which are combined in a summarizing figure.本数据集包含"积木式建造（Building with Blocks）"增材制造（Additive Manufacturing, AM）外立面构件隔热构造方案的参数化热通量仿真数据，该方案依托TRR277跨地区合作研究框架，采用选择性浆料挤出（Selective Paste Intrusion, SPI）工艺与轻骨料制备；本研究中的热仿真针对内部六边形胞状结构的不同参数，计算该构件水平截面的热通量。热通量仿真作为性能反馈被嵌入基于仿真的参数化设计工作流（该工作流不属于本数据集范畴），其中传热分析采用LBNL THERM 7.6软件，参数化几何建模与参数化仿真预处理分别使用参数化建模算法、Rhino3D与Grasshopper工具，并依托Ladybug Tools完成仿真前期准备；本数据集采用单一文件夹结构组织，具体包含125组参数变体对应的仿真文件、一个存放热通量仿真结果图像的文件夹以及一份列明对应参数的表格，此外还选取了3组参数变体，整合为一张汇总示意图。