判断无纺布产品断裂强力好坏的测试数据

数据应用：通过对表格中的算术平均值avg、最大单点值max、最小单点值min等数据进行分析和判断，确定这个生产批次的无纺布产品断裂强力是否合格，并做为是否需要改进生产工艺和该产品是否符合客户要求的判定依据。1．样品采集：用专用模具取5cm*20cm的样品； 2．样品测试：将试验样品装在拉力测试仪上，保证试验样品垂直，且有 0.0046～0.196N（5～45gf）的张力，仪器上下夹具的间距为100mm ，拉伸速度设置为300mm/min，点击触控面板上的"开始"按钮进行测试 ； 3．数据采集：每组样品测试完成之后都会在计算机相应的软件中显示测试结果，记录每组测试数据并输入相应的表格。

Data Application: Analyze and judge data including the arithmetic mean (avg), maximum single-point value (max), and minimum single-point value (min) in the table to determine whether the breaking strength of non-woven fabric products in this production batch is qualified, and use this as the basis for judging whether to improve the production process and whether the products meet customer requirements.
1. Sample Collection: Use a dedicated mold to take samples of 5cm × 20cm;
2. Sample Testing: Install the test sample on the tensile tester, ensure that the test sample is vertical, and apply a tension of 0.0046~0.196N (5~45gf). The distance between the upper and lower fixtures of the instrument is 100mm, the stretching speed is set to 300mm/min, and click the "Start" button on the touch panel to conduct the test;
3. Data Collection: After each group of samples is tested, the test results will be displayed in the corresponding computer software. Record the test data of each group and input them into the corresponding table.

搜集汇总

数据集介绍

特点

该数据集为无纺布产品断裂强力的测试数据，包含286条记录，每日更新，用于判断产品合格性和改进生产工艺。数据已在区块链平台存证。