Dataset for Sound-based Anomalies Detection in Agricultural Robotics Application

This data set contains data related to a Mowing Intelligent Tool (MowIT). Two different microphones were used to collect the sound samples, recording the audio with just one single channel, with a sampling rate of 44100 Hz and 16 bits resolution. The data provided by an inertial measurement unit (IMU) was also recorded since that was already integrated into the MowIT. Two different data collections were performed in different open-air environments with grass to cut. In each collection, eight different sample sets were made, five with the machine cutting using a trimmer line and the other three using the blades. Various combinations were used in each set, and tools were or were not placed on each of the three cutting axes of the MowIT. For each group, the acquisitions were designated from 0 to 7. Each folder of the first collection is a combination containing two audio files, one for each microphone used, the IMU data and a photograph of the lower part of the MowIT to understand the configuration used. In the second collection, to improve the variety of data, three distinct sub-sets were performed for combination: the first with the MowIT turned on but not cutting grass and the next two cutting grass. In samples 4 and 7, there is one audio where the MowIT cuts but stops due to motor stress. In sample 6, the initial recording was not made without cutting grass, and only the two recordings were made cutting grass.