Data supporting 'Fibre-Coupled, Multiplexed Methane Detection Using Range Resolved Interferometry'

Dataset for paper:Fig 2 &amp; Fig3: Time of measurement, The OPD being interrogated, The amplitude of the signal produced by the RRI system, The applied window used, The raw interferrometric signal from the photdiodeNote: The Time measurement only applies to the measurement of the interferometric signal. The RRI signal amplitude is instantaneous<br>Fig 4:The extracted light intensity passing through each tube as a function of time over the period of one ramp. (arbitary units)<br>Fig 5 Absorption Heights:The height of the normalised absorption curves in each test<br>Fig 5 Recorded Gas Flows:The gas flow measurements in each test that were used to calculate the gas concentrations in each test<br>Fig 6: Allan Deviation:The value for the Allan Deviation at each integration period<br>Fig 7: Cross Talk Raw Data:The height of the normalised absorption curve measured for Tube 1 in each test.<br>Fig 7: Cross Talk Protocol:The gas flow supplied to each tube during each test.