Data set for a validated open-source multi-solver fourth generation composite femur model

Contains Abaqus, Ansys and FEBio validated models of fourth generation composite femurs and the output results as well as the experimental data for validation

**
The condition for use of these models is that the following publication is cited:
**
A.R.MacLeod, H.Rose, H.S.Gill, A Validated Open-Source Multi-Solver Fourth Generation Composite Femur Model, Journal of Biomechanical Engineering, 2016

The files contained in this directory are for the composite femur model F10 discussed in the publication.
All models are for the converged 0.75 mm mesh size detailed in the publication.

The ABAQUS input file:
F10_ABAQUS.inp

The ANSYS input file:
F10_ANSYS.ans

The FEBIO geometry and main input files:
F10_FEBIO_GEOM.feb
F10_FEBIO_MAIN.feb

The predicted equivalent strains for each of the models is given is the 'Results' files:
Results_F10_Abaqus.txt
Results_F10_Ansys.txt
Results_F10_FEBio.txt

In these files, rows 1-4 represent strain gauge locations 1-4. There are 11 load increments for each location: 0 to 500 N in 50 N increments.

The experimental results are also provided in an identical format:
Results_F10_EXPERIMENTAL_STRAINS.txt

本数据集包含由 Abaqus、Ansys 和 FEBio 验证的四代复合材料股骨模型及其输出结果以及验证实验数据。

使用这些模型的条件是引用以下出版物：

A.R.MacLeod, H.Rose, H.S.Gill, 《经验证的开源多求解器第四代复合材料股骨模型》，发表于《生物力学工程学杂志》，2016年。

本目录中包含的文件为出版物中讨论的复合材料股骨模型 F10 的相关文件。

所有模型均基于出版物中详细描述的收敛的 0.75 毫米网格尺寸。

ABAQUS 输入文件：
F10_ABAQUS.inp

ANSYS 输入文件：
F10_ANSYS.ans

FEBIO 几何和主要输入文件：
F10_FEBIO_GEOM.feb
F10_FEBIO_MAIN.feb

每个模型的预测等效应变值均在 'Results' 文件中给出：
Results_F10_Abaqus.txt
Results_F10_Ansys.txt
Results_F10_FEBio.txt

在这些文件中，第 1-4 行代表应变片位置 1-4。每个位置有 11 个载荷增量：0 至 500 N，以 50 N 为增量。

实验结果也以相同格式提供：
Results_F10_EXPERIMENTAL_STRAINS.txt