The Bias of Temperature Measurements Based on The Shipborne Rayleigh Scattering Lidar.

The data were generated from IDL.Firstly, reference information (including atmospheric density, temperature, pressure, gravitational acceleration, and molecular mass) is derived from the MSISE00 model, and the filename was named 'model_reference' . Then, atmospheric echo signals under different states are simulated, and the temperature under these conditions is calculated using an inversion algorithm. Finally, a conclusion is drawn by comparing the inversion temperature with the reference temperature.The data of inversion temperature were packed in a folder with the same naming convention. The string before the first dash refers to the setted observation angle (0 or 30) of lidar, and number '444' means nothing here. After the second dash, here comes a number varies from 0 to 30. That indicates the pointing of lidar keeps changing and the maximum is 30 degree. FInally, 'delt' follows or not. If the file name contains 'delt', it means that its data is the difference profile between the inversion temperature and the reference temperature, if not, its data is only represented as the inversion temperature profile and other errors.