强化木地板密度检测数据

根据国家要求，强化木地板密度是产品是否达标的一项重要且强制性标准，密度越大，才能保证产品的质量，本数据对强化木地板密度作出检测，为企业生产做出参考，为地板产品优良品质做出依据。1、产品检测：对强化木地板进行抽样检测，随机抽取21g左右的样本称重并记录，检测时温度保持在22~24℃，相对湿度50~60%，对样本的长度、宽度以及厚度进行测量并记录；2、数据处理：密度=样本重量/（长度*宽度*厚度）；3、根据GB/T 18102-2020  浸渍纸层压木质地板标准，若样本中密度值大于等于0.82g/cm3，则认为该样本合格，否则为不合格；4、对强化木地板密度的检验检测，为企业生产标准化生产做出有效参考。

According to national regulatory requirements, the density of laminate flooring is an important and mandatory criterion for product compliance. Higher density ensures better product quality. This dataset conducts density testing for laminate flooring, providing references for enterprise production and a basis for verifying the excellent quality of flooring products.
1. Product Testing: Carry out sampling inspection on laminate flooring. Randomly select samples weighing approximately 21g, weigh and record their mass. During the testing, the ambient temperature shall be maintained at 22~24℃, and the relative humidity shall be kept at 50~60%. Measure and record the length, width and thickness of each sample.
2. Data Processing: Density = Sample Mass / (Length × Width × Thickness)
3. Compliance Judgment: In accordance with the GB/T 18102-2020 Standard for Impregnated Paper Laminated Wood Flooring, a sample is considered qualified if its density value is greater than or equal to 0.82 g/cm³, otherwise it is unqualified.
4. The density inspection and testing of laminate flooring provides effective references for the standardized production of enterprises.

搜集汇总

数据集介绍

特点

该数据集包含123条强化木地板密度检测数据，用于检测强化木地板密度是否符合国家标准（≥0.82g/cm3），为企业生产提供参考。数据包括检验日期、样品名称、温度、相对湿度、技术指标、试件质量、长度、宽度、厚度、密度和综合判定等字段。