Dissolution Kinetics of Cubic Tricalcium Aluminate Measured by Digital Holographic Microscopy

In situ digital holographic microscopy is used to characterize the dissolution flux of polycrystalline cubic tricalcium aluminate (C3A-c). The surface dissolves at rates that vary considerably with time and spatial location. This implies a statistical distribution of fluxes, but an approximately steady-state median rate was obtained by using flowing solutions and by reducing the water activity in the solution. The dissolution flux from highly crystalline C3A-c depends on the water activity raised to an empirically derived exponent of 5.2 and extrapolates to a median flux of – 2.1 μmol m–2 s–1 in pure water with an interquartile range of 3.2 μmol m–2 s–1. The flux from a less crystalline source of C3A-c has an empirical water activity exponent of 4.6 and an extrapolated median flux of only −1.4 μmol m–2 s–1 in pure water with an interquartile range of 1.9 μmol m–2 s–1. These data suggest that the bulk dissolution rate of C3A-c can vary by at least 30% from one source to another and that variability in the local rate within a single material is even greater because of the heterogeneous spatial distribution of structural characteristics (i.e., degree of crystallinity, chemical impurities, and defects).