污水中石油类污染物检测数据

通过检测数据分析研判，我们可以判断污水中石油类污染物是否超标，避免因污水污染而产生环境污染问题，为环境质量提供意见算法：数据采集，采集污水对该污水进行石油类污染物含量进行检测。数据判定:若石油类污染物实测值不大于5mg/L，则该污水石油类污染物含量为合格，X= C2* V0*D/ Vw 公式中X为石油类污染物含量，式中C2为萃取液中浓度，mg/L；V0为萃取液体积mL，D为稀释倍数，Vw为取样量，mL。Through data analysis and evaluation based on detection results, we can determine whether petroleum pollutants in sewage exceed the standard, avoid environmental pollution caused by sewage contamination, and provide algorithmic support for environmental quality assurance. Data collection: Collect sewage samples and detect the content of petroleum pollutants in the collected sewage samples. Data judgment: If the measured value of petroleum pollutants is no more than 5 mg/L, the petroleum pollutant content in the sewage is qualified. The calculation formula is X = C2 × V0 × D / Vw, where X represents the petroleum pollutant content, C2 is the concentration of the extract (unit: mg/L), V0 is the volume of the extract (unit: mL), D is the dilution factor, and Vw is the sample volume (unit: mL).