ACTGOV Streetlight Control Box Assets

This point dataset shows the locations of Streetlight Control Boxes in the Australian Capital Territory. These assets are either owned or managed by City Services, City and Environment Directorate (CED). Assets managed and / or owned privately, by other ACT Government Directorates or by the Federal Government may not be included. The dataset includes streetlight controller boxes from ActewAGL’s database as of June 30th 2017 in addition to new controller boxes that have been handed over to the ACT Government since then. The streetlight controller boxes are control points that allow a given circuit to be shut off for maintenance purposes but also act as the connection point for multiple circuits. These boxes can be housed inside an electrical substation or as a separate control box sometimes mounted to a streetlight pole. The asset numbers are physically mounted to each controller box and they are determined by the suburb code and a sequential number. This is from the same sequence as the streetlight luminaires. In some cases (generally where a streetlight and a controller box are mounted to the same column) there are duplicate asset numbers. Attributes include location description, suburb, ownership, maintained by, asset sub type (Control Point Inside Substation, External Control Point), the substation number (if housed in a substation), mounting, the number of circuits, CED access, AS 3000 compliance, asbestos panel, date last accessed, the status of the controller box, when it was installed and the reference information for the source of the data. These assets are captured and maintained in the CED asset database through the works as executed (WAE) handover process or field audits. The information available in this dataset may be incomplete and should not be solely relied upon as a search. No warranty is given in relation to the data (including accuracy, reliability, completeness or suitability) and no liability accepted (including without limitation, liability in negligence) for any loss damage or costs (including consequential damage) relating to any use of the data. Minor to substantial delays may occur in updating the source data to reflect as-constructed information. This data is generally used for the Dial Before You Dig (DBYD) service and should be used as a guide only. For additional information, please see the relevant municipal infrastructure standard (https://www.cityservices.act.gov.au/plan-and-build/standards-codes-and-guidelines/municipal-infrastructure-design-standards-mis).本点位数据集展示了澳大利亚首都领地内的路灯控制箱（Streetlight Control Boxes）点位分布。此类资产由城市服务与环境局（City and Environment Directorate, CED）拥有或管理。由其他澳大利亚首都领地政府局处、联邦政府或私人管理及/或拥有的资产，可能未被纳入本数据集。本数据集包含截至2017年6月30日ActewAGL数据库中的路灯控制箱，以及此后移交至澳大利亚首都领地政府的新增控制箱。路灯控制箱为控制点位，可关停指定电路以开展维护作业，同时也是多路电路的连接节点。此类箱体既可设置于变电站内，也可作为独立控制箱安装在路灯杆上。资产编号物理标识于每个控制箱上，由郊区编码与顺序编号组成，其编号序列与路灯灯具一致。部分场景下（通常为路灯与控制箱安装于同一立柱时），会出现资产编号重复的情况。数据集包含的属性包括：位置描述、所属郊区、所有权、维护方、资产子类型（变电站内控制点位、外部控制点位）、变电站编号（若箱体设置于变电站内）、安装方式、电路数量、CED接入权限、符合AS 3000标准、是否含石棉面板、上次访问日期、控制箱状态、安装日期，以及数据来源的参考信息。此类资产通过已执行工程（Works as Executed, WAE）移交流程或现场审计，被录入并维护于CED资产数据库中。本数据集提供的信息可能不完整，不应仅将其作为检索依据。本数据不提供任何担保（包括准确性、可靠性、完整性或适用性），且不对因使用该数据导致的任何损失、损害或成本（包括间接损害）承担责任（包括但不限于过失责任）。更新源数据以反映实际施工信息时，可能会出现轻微至严重的延迟。本数据通常用于开挖前致电查询（Dial Before You Dig, DBYD）服务，仅可作为参考指南使用。如需更多信息，请参阅相关市政基础设施标准（https://www.cityservices.act.gov.au/plan-and-build/standards-codes-and-guidelines/municipal-infrastructure-design-standards-mis）。