Effects of cable sway, electrode surface area, and electrode mass on Electroencephalography signal quality during motion

The data was saved in .bdf format and was collected using the BioSemi ActiveTwo system with for 4 electrodes, 2 placed on the top of the head, 2 placed on the back of the head. Sampling rate was 512 Hz.<br>There are three datasets:a) Electrode Mass Recordings b) Electrode Surface Area Recordings c) Cable Sway Recordings <br>Each dataset was recorded in 4 blocks, so each folder contains the 4 recording blocks with the motion frequency conditions tested. The electrode mass experiment also contains the different mass conditions tested.<br>Mass Conditions:1 x Electrode Mass2 x Electrode Mass3 x Electrode Mass<br>Motion Frequency Conditions:0 = Motors Off0p0 = 0 Hz 1p0 = 1 Hz 1p2 = 1.25 Hz 1p5 = 1.5 Hz 1p75 = 1.75 Hz 2p0 = 2 Hz<br>-nosignal = with no signal from the head-signal = with signal from the head