The Feasibility of Beam Size Lattice Printing using Fused Filament Fabrication for Customized Insole Manufacturing_Cheng Jung

Title: The Feasibility of Beam Size Lattice Printing using Fused Filament Fabrication for Customized Insole ManufacturingAuthor: Jung Cheng Affiliation: National Taipei University of TechnologyDate: 2025-03-28 File: DataSet_The Feasibility of Beam Size Lattice Printing using Fused Filament Fabrication for Customized Insole Manufacturing_Cheng Jung.xlsx Description: This dataset contains experimental data and analysis results related to the fabrication and evaluation of 3D-printed customized insoles using the Fused Filament Fabrication (FFF) process. The Excel file includes the following tables: - **Table 1**: Samples modeled along with their scale and dimensions - **Table 2**: Printing conditions for the FFF printer, including feedstock and printing parameters - **Table 3**: Fabrication time and compression strength across different scales and printing speeds - **Table 4**: Results of insole fabrication in this study - **Table 5**: Changes in navicular height during the stance phase of the gait cycle - **Table 6**: Comfort questionnaire results from user evaluations File Format: All data are stored in Microsoft Excel (.xlsx) format, with clearly labeled sheets corresponding to the tables above. Usage Notes: - All data are self-generated and fully anonymized. - Users are welcome to reuse the data with proper citation under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. Contact: Jung Cheng Email: [e-mail] Funding: This research was supported by the National Science and Technology Council (Taiwan).