嘉兴地区光伏发电系统组件风力载荷预警数据

数据来源于对光伏发电系统组件的风力荷载检测.通过使用风力荷载检测数据，来保证光伏组件的平稳安全运行，避免因荷载超负荷导致的事故，确保光伏发电组件的使用寿命和结构安全，为系统优化和施工提供重要依据1数据采集：通过风速监测点，可以得到此时的风速情况。2数据计算：根据流体运动的伯努利方程原理可以得出的风速和风压的关系，风压为：ω0=0.5*r0* v^2，其中ω0为风压，r0为空气密度，v为风速；通过搜集获得的风压ω0数据，可以进一步计算得出此时的光伏发电系统受到的风载荷数值为：Wk=μz*μs*β*ω0，风载荷达到设计标准的80%则发送二级预警信号，达到设计标准的90%则发送一级预警信号，由此我们可以评估此时光伏发电系统的运行安全情况，减少事故情况的发生。

Dataset source: Wind load testing for photovoltaic (PV) system components. The wind load detection data is utilized to ensure the stable and safe operation of PV modules, prevent accidents caused by overload, guarantee the service life and structural safety of photovoltaic modules, and provide critical basis for system optimization and construction.
1. Data Collection: Real-time wind speed conditions can be acquired through wind speed monitoring points.
2. Data Calculation: The relationship between wind speed and wind pressure can be derived based on Bernoulli's equation principle of fluid dynamics. The wind pressure is calculated as: ω₀ = 0.5 * ρ₀ * v², where ω₀ denotes wind pressure, ρ₀ represents air density, and v stands for wind speed. By collecting the obtained wind pressure ω₀ data, the wind load value acting on the photovoltaic system at the current moment can be further calculated as: Wₖ = μ_z * μ_s * β * ω₀. A secondary early warning signal will be triggered when the wind load reaches 80% of the design standard, and a primary early warning signal will be sent when it reaches 90% of the design standard. In this way, we can evaluate the operational safety status of the photovoltaic system at this stage and reduce the occurrence of accidents.

搜集汇总

数据集介绍

特点

该数据集包含嘉兴地区光伏发电系统组件的风力载荷监测数据，共计515条记录，用于预警和评估光伏组件的运行安全。数据通过风速监测点采集，并基于伯努利方程原理计算风压和风载荷，以确保光伏组件的结构安全和使用寿命。