CRAWDAD due/packet-delivery

The data set includes measurements of the data delivery performance of a WSN link in indoor scenario, where 4 major performance metrics, namely energy, throughput, delay and loss, were measured over 6 months under around 50 thousand parameter configurations of 7 key stack parameters. The meta-data of transmission of nearly 200 million packets are included in the dataset.last modified :2015-03-30nickname :packet-deliveryinstitution :University of Duisburg-Essen and Norwegian University of Science and Technologyrelease date :2015-03-30date/time of measurement start :2012-11-01date/time of measurement end :2013-11-30collection environment :The experiments were conducted in a long hallway of 2 meters by 40 meters in a university building. Each mote was fixed on a wooden stand of 0.7-meter high. We maintained line-of-sight between the two motes. The distance between the two nodes varies from 10 meters to 35 meters. During the experiments, university students and employees may walk in the hallway.network configuration :The parameter configurations considered in the experiments are: packet inter-arrival time (ms): 10, 15, 20, 25, 30, 35, 40, 50 packet payload size (bytes): 20, 35, 50, 65, 80, 95, 110 maximum queue size (packets): 1, 30, 60 Max_tries - maximum number of transmissions: 1, 3, 5 retry delay (ms): 30, 60 transmission power level: 3,7,11,15,19,23,27,31 distance between sender and receiver (meter): 10, 15, 20, 25, 30, 35data collection methodology :The metadata of each packet is measured at the sender node and receiver node and forwarded to a laptop via USB cables.sanitization :The data does not contain any sensitive information that could raise any privacy concerns. Therefore, no sanitization is performed.Tracesetdue/packet-delivery/delayPer-packet delay of packet transmission under various stack parameter configurations.files: delay_10m_12runs.rar, delay_15m_11runs.rar, delay_20m_10runs.rar, delay_25m_9runs.rar, delay_30m_11runs.rar, delay_35m_9runs.rardescription: The traceset includes 6 traces. Each trace consists of the delay measurements of about a dozen of runs under one distance. The delay of each packet is defined as the time between the packet generation at the sender and the packet reception at the receiver.measurement purpose: Network Performance Analysislast modified: 2015-03-30dataname: due/packet-delivery/delayversion: 20150401change: the initial versionrelease date: 2015-03-30nickname: delaydue/packet-delivery/delay Traces10meter: The delay measurements of all packets transimitted at distance 10 meter.format: Each file has total 8064 lines; Each line includes per-packet delay for the packets transmitted in all the runs under the same stack parameter configuration. Each line in the file has the following format: period | packet length | queue_size | max_retries | retry_delay | TxP_level | distance | average_SNR | delay_run1_pkt1 | delay_run1_pkt2 | ... | delay_run1_pkt300 |delay_run2_pkt1 |...| delay_run2_pkt300 |...|delay_runN_pkt1 |...|delay_runN_pkt300 | Note that for packet that are not received or delay measurement has error, the corresponding delay value is 9999 or 1111.description: Each trace contains the delay measurements of about a dozen of runs at the same distance. Each run contains delay of 300 packets.last modified: 2015-03-30dataname: due/packet-delivery/delay/10meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/delay_10m_12runs.rarnickname: 10meter15meter: The delay measurements of all packets transmitted at distance 15 meter.format: Each file has total 8064 lines; Each line includes per-packet delay for the packets transmitted in all the runs under the same stack parameter configuration. Each line in the file has the following format: period | packet length | queue_size | max_retries | retry_delay | TxP_level | distance | average_SNR | delay_run1_pkt1 | delay_run1_pkt2 | ... | delay_run1_pkt300 |delay_run2_pkt1 |...| delay_run2_pkt300 |...|delay_runN_pkt1 |...|delay_runN_pkt300 | Note that for packet that are not received or delay measurement has error, the corresponding delay value is 9999 or 1111.description: Each trace contains the delay measurements of about a dozen of runs at the same distance. Each run contains delay of 300 packets.last modified: 2015-03-30dataname: due/packet-delivery/delay/15meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/delay_15m_11runs.rarnickname: 15meter20meter: The delay measurements of all packets transmitted at distance 20 meter.format: Each file has total 8064 lines; Each line includes per-packet delay for the packets transmitted in all the runs under the same stack parameter configuration. Each line in the file has the following format: period | packet length | queue_size | max_retries | retry_delay | TxP_level | distance | average_SNR | delay_run1_pkt1 | delay_run1_pkt2 | ... | delay_run1_pkt300 |delay_run2_pkt1 |...| delay_run2_pkt300 |...|delay_runN_pkt1 |...|delay_runN_pkt300 | Note that for packet that are not received or delay measurement has error, the corresponding delay value is 9999 or 1111.description: Each trace contains the delay measurements of about a dozen runs at the same distance. Each run contains delay of 300 packets.last modified: 2015-03-30dataname: due/packet-delivery/delay/20meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/delay_20m_10runs.rarnickname: 20meter25meter: The delay measurements of all packets transmitted at distance 25 meter.format: Each file has total 8064 lines; Each line includes per-packet delay for the packets sent in all the runs under the same stack parameter configuration. Each line in the file has the following format: period | packet length | queue_size | max_retries | retry_delay | TxP_level | distance | average_SNR | delay_run1_pkt1 | delay_run1_pkt2 | ... | delay_run1_pkt300 |delay_run2_pkt1 |...| delay_run2_pkt300 |...|delay_runN_pkt1 |...|delay_runN_pkt300 | Note that for packet that are not received or delay measurement has error, the corresponding delay value is 9999 or 1111.description: Each trace contains the delay measurements of about a dozen of runs at the same distance. Each run contains delay of 300 packets.last modified: 2015-03-30dataname: due/packet-delivery/delay/25meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/delay_25m_9runs.rarnickname: 25meter30meter: The delay measurements of all packets transmitted at distance 30 meter.format: Each file has total 8064 lines; Each line includes per-packet delay for the packets sent in all the runs under the same stack parameter configuration. Each line in the file has the following format: period | packet length | queue_size | max_retries | retry_delay | TxP_level | distance | average_SNR | delay_run1_pkt1 | delay_run1_pkt2 | ... | delay_run1_pkt300 |delay_run2_pkt1 |...| delay_run2_pkt300 |...|delay_runN_pkt1 |...|delay_runN_pkt300 | Note that for packet that are not received or delay measurement has error, the corresponding delay value is 9999 or 1111.description: Each trace contains the delay measurements of about a dozen runs at the same distance. Each run contains delay of 300 packets.last modified: 2015-03-30dataname: due/packet-delivery/delay/30meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/delay_30m_11runs.rarnickname: 30meter35meter: The delay measurements of all packets transmitted at distance 35 meter.format: Each file has total 8064 lines; Each line includes per-packet delay for the packets transmitted in all the runs under the same stack parameter configuration. Each line in the file has the following format: period | packet length | queue_size | max_retries | retry_delay | TxP_level | distance | average_SNR | delay_run1_pkt1 | delay_run1_pkt2 | ... | delay_run1_pkt300 |delay_run2_pkt1 |...| delay_run2_pkt300 |...|delay_runN_pkt1 |...|delay_runN_pkt300 | Note that for packet that are not received or delay measurement has error, the corresponding delay value is 9999 or 1111.description: Each trace contains the delay measurements of about a dozen of runs at the same distance. Each run contains delay of 300 packets.last modified: 2015-03-30dataname: due/packet-delivery/delay/35meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/delay_35m_9runs.rarnickname: 35meterdue/packet-delivery/packet-metadataThe metadata of each packet included in the trace are: RSSI, LQI, noise floor, actual queue size, overflow, actual retransmission number, deliver success/fail and arrival timefiles: distance_10m.rar, distance_15m.rar, distance_20m.rar, distance_25m.rar, distance_30m.rar, distance_35m.rardescription: The traceset includes 6 traces. Each trace consists of a dozen of files collected at the same distance. One file includes the measurements of one run. Each file has 8064 lines, and each line includes the metadata of 300 packets that were transmitted at the same parameter configuration.measurement purpose: Bit Error Characterization, Network Performance Analysislast modified: 2015-03-30dataname: due/packet-delivery/packet-metadataversion: 20150401change: the initial versionrelease date: 2015-03-30nickname: packet-metadatadue/packet-delivery/packet-metadata Traces10meter: The measurements of all packets that were transmitted at distance 10 meter.format: Each file has 8064 lines; Each line includes data delivery information for 300 packets transmitted under the same stack parameter configuration. Each line has the following format: experiment_number | run_number | period | packet_length | queue_size | Max_tries | retry_delay | TxP_level | distance | pakcet_sequence_number_001 | buffer_overflow | actual_queue_size| ACK| actual_try_number| RSSI | noise_floor | LQI | arrival_time| ... | pakcet_sequence_number_300 | buffer_overflow | actual_queue_size| ACK| actual_retry_number| RSSI | noise_floor | LQI | arrival_time| Note that the RSSI values in the dataset is without offset. The true RSSI values must add an offset of - 45 dBm.description: Each trace consists of a dozen of files collected at the same distance. One file includes the measurements of one run. Each file has 8064 lines, and each line includes the metadata of 300 packets that were transmitted at the same parameter configuration.last modified: 2015-03-30dataname: due/packet-delivery/packet-metadata/10meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/distance_10m.rarnickname: 10meter15meter: The measurements of all packets that were transmitted at distance 15 meter.format: Each file has 8064 lines; Each line includes data delivery information for 300 packets transmitted under the same stack parameter configuration. Each line has the following format: experiment_number | run_number | period | packet_length | queue_size | Max_tries | retry_delay | TxP_level | distance | pakcet_sequence_number_001 | buffer_overflow | actual_queue_size| ACK| actual_try_number| RSSI | noise_floor | LQI | arrival_time| ... | pakcet_sequence_number_300 | buffer_overflow | actual_queue_size| ACK| actual_retry_number| RSSI | noise_floor | LQI | arrival_time| Note that the RSSI values in the dataset is without offset. The true RSSI values must add an offset of - 45 dBm.description: Each trace consists of a dozen of files collected at the same distance. One file includes the measurements of one run. Each file has 8064 lines, and each line includes the metadata of 300 packets that were transmitted at the same parameter configuration.last modified: 2015-03-30dataname: due/packet-delivery/packet-metadata/15meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/distance_15m.rarnickname: 15meter20meter: The measurements of all packets that were transmitted at distance 20 meter.format: Each file has 8064 lines; Each line includes data delivery information for 300 packets transmitted under the same stack parameter configuration. Each line has the following format: experiment_number | run_number | period | packet_length | queue_size | Max_tries | retry_delay | TxP_level | distance | pakcet_sequence_number_001 | buffer_overflow | actual_queue_size| ACK| actual_try_number| RSSI | noise_floor | LQI | arrival_time| ... | pakcet_sequence_number_300 | buffer_overflow | actual_queue_size| ACK| actual_retry_number| RSSI | noise_floor | LQI | arrival_time| Note that the RSSI values in the dataset is without offset. The true RSSI values must add an offset of - 45 dBm.description: Each trace consists of a dozen of files collected at the same distance. One file includes the measurements of one run. Each file has 8064 lines, and each line includes the metadata of 300 packets that were transmitted at the same parameter configuration.last modified: 2015-03-30dataname: due/packet-delivery/packet-metadata/20meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/distance_20m.rarnickname: 20meter25meter: The measurements of all packets that were transmitted at distance 25 meter.format: Each file has 8064 lines; Each line includes data delivery information for 300 packets transmitted under the same stack parameter configuration. Each line has the following format: experiment_number | run_number | period | packet_length | queue_size | Max_tries | retry_delay | TxP_level | distance | pakcet_sequence_number_001 | buffer_overflow | actual_queue_size| ACK| actual_try_number| RSSI | noise_floor | LQI | arrival_time| ... | pakcet_sequence_number_300 | buffer_overflow | actual_queue_size| ACK| actual_retry_number| RSSI | noise_floor | LQI | arrival_time| Note that the RSSI values in the dataset is without offset. The true RSSI values must add an offset of - 45 dBm.description: Each trace consists of a dozen of files collected at the same distance. One file includes the measurements of one run. Each file has 8064 lines, and each line includes the metadata of 300 packets that were transmitted at the same parameter configuration.last modified: 2015-03-30dataname: due/packet-delivery/packet-metadata/25meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/distance_25m.rarnickname: 25meter30meter: The measurements of all packets that were transmitted at distance 30 meter.format: Each file has 8064 lines; Each line includes data delivery information for 300 packets transmitted under the same stack parameter configuration. Each line has the following format: experiment_number | run_number | period | packet_length | queue_size | Max_tries | retry_delay | TxP_level | distance | pakcet_sequence_number_001 | buffer_overflow | actual_queue_size| ACK| actual_try_number| RSSI | noise_floor | LQI | arrival_time| ... | pakcet_sequence_number_300 | buffer_overflow | actual_queue_size| ACK| actual_retry_number| RSSI | noise_floor | LQI | arrival_time| Note that the RSSI values in the dataset is without offset. The true RSSI values must add an offset of - 45 dBm.description: Each trace consists of a dozen of files collected at the same distance. One file includes the measurements of one run. Each file has 8064 lines, and each line includes the metadata of 300 packets that were transmitted at the same parameter configuration.last modified: 2015-03-30dataname: due/packet-delivery/packet-metadata/30meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/distance_30m.rarnickname: 30meter35meter: The measurements of all packets that were transmitted at distance 35 meter.format: Each file has 8064 lines; Each line includes data delivery information for 300 packets transmitted under the same stack parameter configuration. Each line has the following format: experiment_number | run_number | period | packet_length | queue_size | Max_tries | retry_delay | TxP_level | distance | pakcet_sequence_number_001 | buffer_overflow | actual_queue_size| ACK| actual_try_number| RSSI | noise_floor | LQI | arrival_time| ... | pakcet_sequence_number_300 | buffer_overflow | actual_queue_size| ACK| actual_retry_number| RSSI | noise_floor | LQI | arrival_time| Note that the RSSI values in the dataset is without offset. The true RSSI values must add an offset of - 45 dBm.description: Each trace consists of a dozen of files collected at the same distance. One file includes the measurements of one run. Each file has 8064 lines, and each line includes the metadata of 300 packets that were transmitted at the same parameter configuration.last modified: 2015-03-30dataname: due/packet-delivery/packet-metadata/35meterversion: 20150401change: the initial versionrelease date: 2015-03-30url: /download/due/packet-delivery/distance_35m.rarnickname: 35meter

搜集汇总

背景与挑战

背景概述

该数据集是一个室内无线传感器网络（WSN）链路数据传输性能测量数据集，涵盖能量、吞吐量、延迟和丢失四大性能指标，在6个月内通过约5万个参数配置收集了近2亿个数据包的元数据。数据集包括不同距离（10米至35米）下的延迟测量和包元数据（如RSSI、LQI、噪声水平等），适用于网络性能分析和比特错误表征研究。