Data for: High Temperature Creep of Sanicro 25 Austenitic Steel at Low Stresses

This file contains creep curves data for the Sanicro 25 steel at 700-800°C and stresses below 40MPa.
Creep was measured using helicoid spring specimen technique, Stress and strain values are expressed
as equivalent tensile values using von Mises criterion.

Data are organised in blocks, where the first column is time relative to the test start in seconds
and the other columns are strains expressesd as dimensionless values
corresponding to the applied stress, which is listed in the top row
and expressed in MPa.

For other information like the material A and B please refer the corresponding article in MSE-A.