METHODS AND DEVICES FOR CONTINUOUS TRANSFER OF PARTICULATE AND/OR FIBROUS MATERIAL BETWEEN TWO ZONES WITH DIFFERENT TEMPERATURES AND PRESSURES

Continuous transfer of particulate material into pressurized steam reactors is provided by "flow feeder" methods and devices. Material such as lignocellulosic biomass feedstocks are compacted into a "low density" plug， < 700 kg/m3， which provides a dynamic seal against pressurized steam through exploitation of a steam condensation zone. The rate at which the steam condensation zone moves into the "low density" plug is offset by the rate at which compacted material is fed into the pressurized reactor. Preferred devices compact material within a flow feeder chamber by use of a loading device that works against counter-pressure provided by an unloading device. Compacted material is actively disintegrated and fed into the reactor by the unloading device. In preferred embodiments， compacted material is fed in a steady-state operation in which the interface between the steam condensation zone and the low pressure inlet zone remains stationary within the flow feeder chamber. Continuous transfer of particulate material into pressurized steam reactors is provided by "flow feeder" methods and devices. Material such as lignocellulosic biomass feedstocks are compacted into a "low density" plug， < 700 kg/m3， which provides a dynamic seal against pressurized steam through exploitation of a steam condensation zone. The rate at which the steam condensation zone moves into the "low density" plug is offset by the rate at which compacted material is fed into the pressurized reactor. Preferred devices compact material within a flow feeder chamber by use of a loading device that works against counter-pressure provided by an unloading device. Compacted material is actively disintegrated and fed into the reactor by the unloading device. In preferred embodiments， compacted material is fed in a steady-state operation in which the interface between the steam condensation zone and the low pressure inlet zone remains stationary within the flow feeder chamber.