OC7 Project Phase II: Definition Document and Modelling Files for WP2.2 on Global-to-Local Load Transfer Approaches in Floating Structures

Archive containing the definition document and modelling files of package WP2.2 from the OC7 project Phase II. The following files are included: .\01_DEFFE_Output_for_comparison_REV2.pdf: Illustrating panels and cross sections relevant for pressure/stress/load reporting.OC7_WP2p2_ColumnAxialDrag.xlsx: Calculation sheet for drag coefficient for column end plates (based on column bottom area).OC7_WP2p2_Description_REV12.xlsx: Description document covering information on the model and load cases. .\02_CADFull assembly updated.igs: Floater hull geometry in IGS format.Full assembly updated.scdoc: Floater hull geometry in SpaceClaim format.Full assembly updated.stp: Floater hull geometry in STEP format. .\03_FEANSYS_FE_MODEL.zip: Model for Ansys Workbench (floater only)ANSYS_FE_MODEL_Subs+tower+RNA.zip: Model for Ansys Workbench (floater, tower and RNA)OC7_FE_MODEL_Subs+tower+RNA.dat: Mesh in Ansys format (floater, tower and RNA)OC7_FE_MODEL_Subs+tower+RNA_modal.bdf: Mesh in Nastran format (floater, tower and RNA)OC7_FE_MODEL_v3.dat: Mesh in Ansys format (floater only).OC7_FE_MODEL_v3_modal.bdf: Mesh in Nastran format (floater only). .\04_OFOrcaFlex_Example_LC7p3.dat: OrcaFlex example model for load case LC7.3.UMaineSemi_SB.GDF: Body mesh file for OrcaWaveUMaineSemi_SB.owd: OrcaWave model file (single body)UMaineSemi_SB.owr: Results file from OrcaWave calculation (single body) The results are archived separately [https://doi.org/10.5281/zenodo.21222818].