CRAWDAD cmu/zigbee-smarthome

Captured Zigbee packets from commercial smart home devices.This Carnegie Mellon University dataset contains Zigbee packets that were captured using a software-defined radio (USRP N210). More specifically, the contributors used GNU Radio with the gr-ieee802-15-4 and gr-foo modules to receive IEEE 802.15.4 packets and store them in PCAP format. The captured network traffic was generated from ten commercial Zigbee devices that can be found in smart home environments. Eight experiments were conducted that differed in the smart hub that was used and the physical topology of the devices. These experiments took place on the Silicon Valley campus of Carnegie Mellon University in order to analyze the security of Zigbee-enabled smart homes. The experiments lasted about 34.644 hours in total and resulted in the logging of 571,509 valid packets. More details about the procedure that was followed and the setup of each experiment are included in the dataset, along with the encryption keys that were used in order to facilitate packet analysis. DOI for this dataset: 10.15783/c7-nvc6-4q28date/time of measurement start: 2020-02-24date/time of measurement start: 2020-02-28Tracesetsspring2020 Set of Zigbee packets that were captured during the Spring 2020 semester.file:Captured Zigbee packets from eight experiments that took place in Spring 2020, on the Silicon Valley campus of Carnegie Mellon University, in order to analyze the security of Zigbee-enabled smart homes. The packets were captured and stored in PCAP format using a software-defined radio (USRP N210) and GNU Radio with the gr-ieee802-15-4 and gr-foo modules.measurement purpose: Educational Use, Network Security spring 2020 Tracessth3-room: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01) and eight other devices were placed in a single room.configuration: The sth3-room.zip file contains the sth3-room.pcap and sth3-room.txt files. The sth3-room.pcap file contains the Zigbee packets that were captured during the sth3-room experiment, while the sth3-room.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-room: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200) and eight other devices were placed in a single room.configuration: The sth2-room.zip file contains the sth2-room.pcap and sth2-room.txt files. The sth2-room.pcap file contains the Zigbee packets that were captured during the sth2-room experiment, while the sth2-room.txt file contains additional information about the experimental setup and the encryption keys that were used.sth3-duos: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01) and one other device at a time were placed in a single room.configuration: The sth3-duos.zip file contains the sth3-duos.pcap and sth3-duos.txt files. The sth3-duos.pcap file contains the Zigbee packets that were captured during the sth3-duos experiment, while the sth3-duos.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-duos: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200) and one other device at a time were placed in a single room.configuration: The sth2-duos.zip file contains the sth2-duos.pcap and sth2-duos.txt files. The sth2-duos.pcap file contains the Zigbee packets that were captured during the sth2-duos experiment, while the sth2-duos.txt file contains additional information about the experimental setup and the encryption keys that were used.sth3-house: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01) and eight other devices were placed in different rooms.. configuration: The sth3-house.zip file contains the sth3-house.pcap and sth3-house.txt files. The sth3-house.pcap file contains the Zigbee packets that were captured during the sth3-house experiment, while the sth3-house.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-house: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200) and eight other devices were placed in different rooms.configuration: The sth2-house.zip file contains the sth2-house.pcap and sth2-house.txt files. The sth2-house.pcap file contains the Zigbee packets that were captured during the sth2-house experiment, while the sth2-house.txt file contains additional information about the experimental setup and the encryption keys that were used.sth3-trios: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01), a Zigbee Router, and one other device at a time were placed in different rooms.configuration: The sth3-trios.zip file contains the sth3-trios.pcap and sth3-trios.txt files. The sth3-trios.pcap file contains the Zigbee packets that were captured during the sth3-trios experiment, while the sth3-trios.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-trios: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200), a Zigbee Router, and one other device at a time were placed in different rooms.configuration: The sth2-trios.zip file contains the sth2-trios.pcap and sth2-trios.txt files. The sth2-trios.pcap file contains the Zigbee packets that were captured during the sth2-trios experiment, while the sth2-trios.txt file contains additional information about the experimental setup and the encryption keys that were used.