CRAWDAD cmu/zigbee-smarthome

Captured Zigbee packets from commercial smart home devices.This Carnegie Mellon University dataset contains Zigbee packets that were captured using a software-defined radio (USRP N210). More specifically, the contributors used GNU Radio with the gr-ieee802-15-4 and gr-foo modules to receive IEEE 802.15.4 packets and store them in PCAP format. The captured network traffic was generated from ten commercial Zigbee devices that can be found in smart home environments. Eight experiments were conducted that differed in the smart hub that was used and the physical topology of the devices. These experiments took place on the Silicon Valley campus of Carnegie Mellon University in order to analyze the security of Zigbee-enabled smart homes. The experiments lasted about 34.644 hours in total and resulted in the logging of 571,509 valid packets. More details about the procedure that was followed and the setup of each experiment are included in the dataset, along with the encryption keys that were used in order to facilitate packet analysis. DOI for this dataset: 10.15783/c7-nvc6-4q28date/time of measurement start: 2020-02-24date/time of measurement start: 2020-02-28Tracesetsspring2020 Set of Zigbee packets that were captured during the Spring 2020 semester.file:Captured Zigbee packets from eight experiments that took place in Spring 2020, on the Silicon Valley campus of Carnegie Mellon University, in order to analyze the security of Zigbee-enabled smart homes. The packets were captured and stored in PCAP format using a software-defined radio (USRP N210) and GNU Radio with the gr-ieee802-15-4 and gr-foo modules.measurement purpose: Educational Use, Network Security spring 2020 Tracessth3-room: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01) and eight other devices were placed in a single room.configuration: The sth3-room.zip file contains the sth3-room.pcap and sth3-room.txt files. The sth3-room.pcap file contains the Zigbee packets that were captured during the sth3-room experiment, while the sth3-room.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-room: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200) and eight other devices were placed in a single room.configuration: The sth2-room.zip file contains the sth2-room.pcap and sth2-room.txt files. The sth2-room.pcap file contains the Zigbee packets that were captured during the sth2-room experiment, while the sth2-room.txt file contains additional information about the experimental setup and the encryption keys that were used.sth3-duos: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01) and one other device at a time were placed in a single room.configuration: The sth3-duos.zip file contains the sth3-duos.pcap and sth3-duos.txt files. The sth3-duos.pcap file contains the Zigbee packets that were captured during the sth3-duos experiment, while the sth3-duos.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-duos: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200) and one other device at a time were placed in a single room.configuration: The sth2-duos.zip file contains the sth2-duos.pcap and sth2-duos.txt files. The sth2-duos.pcap file contains the Zigbee packets that were captured during the sth2-duos experiment, while the sth2-duos.txt file contains additional information about the experimental setup and the encryption keys that were used.sth3-house: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01) and eight other devices were placed in different rooms.. configuration: The sth3-house.zip file contains the sth3-house.pcap and sth3-house.txt files. The sth3-house.pcap file contains the Zigbee packets that were captured during the sth3-house experiment, while the sth3-house.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-house: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200) and eight other devices were placed in different rooms.configuration: The sth2-house.zip file contains the sth2-house.pcap and sth2-house.txt files. The sth2-house.pcap file contains the Zigbee packets that were captured during the sth2-house experiment, while the sth2-house.txt file contains additional information about the experimental setup and the encryption keys that were used.sth3-trios: Captured Zigbee packets during the experiment where the third generation of the SmartThings Hub (IM6001-V3P01), a Zigbee Router, and one other device at a time were placed in different rooms.configuration: The sth3-trios.zip file contains the sth3-trios.pcap and sth3-trios.txt files. The sth3-trios.pcap file contains the Zigbee packets that were captured during the sth3-trios experiment, while the sth3-trios.txt file contains additional information about the experimental setup and the encryption keys that were used.sth2-trios: Captured Zigbee packets during the experiment where the second generation of the SmartThings Hub (STH-ETH-200), a Zigbee Router, and one other device at a time were placed in different rooms.configuration: The sth2-trios.zip file contains the sth2-trios.pcap and sth2-trios.txt files. The sth2-trios.pcap file contains the Zigbee packets that were captured during the sth2-trios experiment, while the sth2-trios.txt file contains additional information about the experimental setup and the encryption keys that were used.

本数据集采集自商用智能家居设备的Zigbee数据包。本卡内基梅隆大学（Carnegie Mellon University）数据集包含通过软件定义无线电（software-defined radio, SDR）USRP N210捕获的Zigbee数据包。具体而言，研究人员使用搭载gr-ieee802-15-4与gr-foo模块的GNU Radio接收IEEE 802.15.4数据包，并将其存储为PCAP格式。

本次采集的网络流量由10款可在智能家居环境中获取的商用Zigbee设备生成。研究共开展8组实验，实验差异体现在所使用的智能网关以及设备的物理拓扑结构上。所有实验均在卡内基梅隆大学硅谷校区开展，旨在分析支持Zigbee的智能家居的安全性。本次实验总时长约34.644小时，共记录到571,509条有效数据包。数据集包含实验流程细节、每组实验的配置信息，以及用于辅助数据包分析的加密密钥。本数据集的DOI为：10.15783/c7-nvc6-4q28。测量开始时间：2020-02-24；测量结束时间：2020-02-28。

### 2020年春季追踪集（spring2020）
本合集为2020年春季学期期间采集的Zigbee数据包。文件说明：包含2020年春季在卡内基梅隆大学硅谷校区开展的8组实验的Zigbee捕获数据包，用于分析支持Zigbee的智能家居的安全性。数据包通过软件定义无线电USRP N210，以及搭载gr-ieee802-15-4与gr-foo模块的GNU Radio捕获并存储为PCAP格式。测量用途：教育用途、网络安全。

#### sth3-room
本次实验中，第三代SmartThings网关（型号IM6001-V3P01）与其他8台设备被放置在同一房间内，采集得到的Zigbee数据包。
配置说明：sth3-room.zip压缩包包含sth3-room.pcap与sth3-room.txt文件。其中sth3-room.pcap存储了本次实验捕获的Zigbee数据包，sth3-room.txt则包含实验配置细节与所用加密密钥的额外信息。

#### sth2-room
本次实验中，第二代SmartThings网关（型号STH-ETH-200）与其他8台设备被放置在同一房间内，采集得到的Zigbee数据包。
配置说明：sth2-room.zip压缩包包含sth2-room.pcap与sth2-room.txt文件。其中sth2-room.pcap存储了本次实验捕获的Zigbee数据包，sth2-room.txt则包含实验配置细节与所用加密密钥的额外信息。

#### sth3-duos
本次实验中，第三代SmartThings网关（型号IM6001-V3P01）与另一台设备（每次仅接入一台）被放置在同一房间内，采集得到的Zigbee数据包。
配置说明：sth3-duos.zip压缩包包含sth3-duos.pcap与sth3-duos.txt文件。其中sth3-duos.pcap存储了本次实验捕获的Zigbee数据包，sth3-duos.txt则包含实验配置细节与所用加密密钥的额外信息。

#### sth2-duos
本次实验中，第二代SmartThings网关（型号STH-ETH-200）与另一台设备（每次仅接入一台）被放置在同一房间内，采集得到的Zigbee数据包。
配置说明：sth2-duos.zip压缩包包含sth2-duos.pcap与sth2-duos.txt文件。其中sth2-duos.pcap存储了本次实验捕获的Zigbee数据包，sth2-duos.txt则包含实验配置细节与所用加密密钥的额外信息。

#### sth3-house
本次实验中，第三代SmartThings网关（型号IM6001-V3P01）与其他8台设备被放置在不同房间内，采集得到的Zigbee数据包。
配置说明：sth3-house.zip压缩包包含sth3-house.pcap与sth3-house.txt文件。其中sth3-house.pcap存储了本次实验捕获的Zigbee数据包，sth3-house.txt则包含实验配置细节与所用加密密钥的额外信息。

#### sth2-house
本次实验中，第二代SmartThings网关（型号STH-ETH-200）与其他8台设备被放置在不同房间内，采集得到的Zigbee数据包。
配置说明：sth2-house.zip压缩包包含sth2-house.pcap与sth2-house.txt文件。其中sth2-house.pcap存储了本次实验捕获的Zigbee数据包，sth2-house.txt则包含实验配置细节与所用加密密钥的额外信息。

#### sth3-trios
本次实验中，第三代SmartThings网关（型号IM6001-V3P01）、一台Zigbee路由器与另一台设备（每次仅接入一台）被放置在不同房间内，采集得到的Zigbee数据包。
配置说明：sth3-trios.zip压缩包包含sth3-trios.pcap与sth3-trios.txt文件。其中sth3-trios.pcap存储了本次实验捕获的Zigbee数据包，sth3-trios.txt则包含实验配置细节与所用加密密钥的额外信息。

#### sth2-trios
本次实验中，第二代SmartThings网关（型号STH-ETH-200）、一台Zigbee路由器与另一台设备（每次仅接入一台）被放置在不同房间内，采集得到的Zigbee数据包。
配置说明：sth2-trios.zip压缩包包含sth2-trios.pcap与sth2-trios.txt文件。其中sth2-trios.pcap存储了本次实验捕获的Zigbee数据包，sth2-trios.txt则包含实验配置细节与所用加密密钥的额外信息。

搜集汇总

背景与挑战

背景概述

该数据集捕获了商用智能家居设备的Zigbee网络数据包，使用软件定义无线电以PCAP格式存储，包含八个不同实验设置，总时长约34.644小时，记录了超过57万有效数据包，旨在分析Zigbee智能家居的安全性，并提供了加密密钥以支持研究。数据集来自卡内基梅隆大学，属于CRAWDAD集合，适用于无线网络和安全分析领域。