Code and dataset for the results found on "Vehicle integrated photovoltaics module architecture optimization under dynamic shading"

The files needed to produce the results found on the paper are gathered in the following packages: Raw data: this folder contains two types of files: .tbl files. These contain the I-V curves on the route. .csv files. These contain the maximum power of each I-V curve on the route. The nomenclature indicates: cell orientation (6x36 for horizontal cells and 12x18 for vertical) submodule if applies (sumbatriz_118_12). The first group of numbers (118) indicates the row of Distributed module (cells 1 to 18). The second group of numbers indicates the column of the Distributed module (12). 126x23 refers to the total PV dimensions under study, in cm. 35x105 refers to the dimensions of each individual cell under study, in mm. Functions: matlab script that overlays the PV grid over a particular frame. Processed. Contains the frames presented on the paper. shadow_percent.m: Matlab script that projects the grid over a specific frame. Run: It includes the files that generate the vast majority of the results. lee_tbl.py: Generates Fig. 6 plot_energy_bar_graphs.py: Generates Figs 4 and 5. analisis_mppt_listas.py. Generates the MPPT files for a range of P&O parameter values. The results are used to produce the figures in the annexes and Figs 8 and 9. Results Data: "RESULTADOS P&O": it includes all the files produced after running "analisis_mppt_listas.py" resumen.xlsx: it includes a compilation of the energy results of every route and submodule.