Reflection seismic study of the Siljan Ring impact structure: Mora - Shot geometry corrected

Two new reflection seismic profiles over the Paleozoic successions of the western part of the Siljan Ring impact structure were acquired during 2011, the Mora and the Orsa profile. This data set concerns the Mora profile. The profile has length of c. 10 km and the processed data image the geological section to about 3 km depth. During the survey, 391 source points (VIBSIST 3000) were recorded by 320 receiver channels for 30 seconds. From this recording, the following data sets were generated and are published here: 1) decoded and quality controlled raw data; 2) pre-processed (shot geometry applied) data; 3) stacked data; 4) migrated data; 5) depth converted data and velocity field.
Key acquisition parameters are:
Number of channels: 320 (160-160)
Near offset: 0m
Geophone spacing: 10 m
Geophone type: 28 Hz single
Source spacing: 20 m
Source type: VIBSIST 3000
Hit interval between hammer blows: 100-200 ms
Sweeps per source point: 3-4
Nominal fold: 80
Recording instrument: SERCEL 428UL
Sample rate: 1 ms
Field low cut: Out
Field high cut: 400 Hz
Record length: 30 s
Profile length: 10 km
Source points: 391
Dates acquired: 3/6-9/6: 2011

This dataset contains processed data of the Mora profile:
Processing steps for this data set:
1: Read decoded VIBSIST data
2: Bulk static shift to zero time
3: Apply geometry

Processed seismic data stored as one file for the enitre seismic profile, according to SEG technical standard SEG-Y revision 1 (SEG-Y_r1.0, 2002); https://seg.org/Publications/SEG-Technical-Standards