Perforation Characteristics of Metal Target plate subjected to PELE

Abstract The perforation tests of 45 # steel target plate and 2A12 aluminium alloy target plate by PELE (the Penetrator with Lateral Efficiency) were carried out in this paper to study the perforation failure characteristics of metal target plate. The macroscopic morphology of perforation on the target plate and the plug was observed, and the perforation wall was cut and polished to observe the distribution and trend of the cracks in the perforation wall by scanning electron microscopy (SEM) and metallographic microscopy. The magnitude and direction of the force produced by PELE on the target during penetration were calculated by numerical simulation. The experimental and numerical results show that, the perforation failure of metal target plate by PELE is different from the ductile perforation by conical-nosed projectile and the punching failure by flat-nosed projectile. The longitudinal cross section of the perforation is funnel-shaped and the shape of the plug is like a circular truncated cone. In the process of penetrating the target plate, the expansion of the filling causes the jacket to exert a force with a certain angle to the direction of projectile movement, which is the main reason for the funnel-shaped perforation and the circular truncated cone shaped plug.