Temperature data used for waterfall plots

General description of the temperature data used in the paper:
There are seven data files containing the three-dimensional data sets (temperature against distance and time) captured by the Halo DTS analyser manufactured by Sensornet Ltd.
File names are: 0am_20150401.csv; 0am_20150503.csv; 12am_20150504.csv; 0am_20150529.csv; 23pm_20150612.csv; 0am_20150614.csv
In each file the y axis is time, and the name of each file indicates the starting time and date (i.e. 0am, 20150401; 0am, 20150503; 12am, 20150504; 0am, 20150529; 23pm, 20150612; 0am, 20150614). The total measurement time for each file is 24 hours. The time interval between each data point is 2 minutes.
The x axis is distance, starting from 0 m at the location of the DTS analyser. The total distance in each file is 1218m. The distance interval between each data point is 2.03m.
The temperature unit is degree Celsius, time interval: 2 minutes, distance interval: 2.03m.

本文所采用温度数据之概述：本论文中所涉及之温度数据，系由 Sensornet Ltd. 生产的 Halo DTS 分析仪所捕捉的三维数据集（温度与距离及时间的关系）。数据文件共计七份，具体名称如下：0am_20150401.csv；0am_20150503.csv；12am_20150504.csv；0am_20150529.csv；23pm_20150612.csv；0am_20150614.csv。每份文件中，y轴代表时间，文件名所标识者即为起始时间与日期（例如，0am, 20150401；0am, 20150503；12am, 20150504；0am, 20150529；23pm, 20150612；0am, 20150614）。每份文件之总测量时间为24小时，数据点间的时间间隔为2分钟。x轴代表距离，起始于DTS分析仪所在位置之0米处，每份文件之总距离为1218米，数据点间的距离间隔为2.03米。温度单位为摄氏度，时间间隔为2分钟，距离间隔为2.03米。