Quality Assessment of Air-dried Teakwood Boards Using Moisture Content Gradients

ABSTRACT The determination of moisture content gradients is one of the most important steps for assessing the quality of wood drying. The general aim of this work was to study the quality of air-dried teakwood boards according to the gradients of moisture content in thickness and length. Six representative boards (40 × 180 × 2,300 mm) were sampled from a stack air-dried under shelter, divided into 30 equal parts in length and measured with a resistance moisture meter, resulting in four treatments: two depths (1/4 and 1/2 thickness) and two surfaces (inner and outer) of measurement. As main results, we can conclude that the air-drying quality can be considered good, mainly for two reasons: i) the average moisture content gradients in thickness were comparable to those reported in literature for kiln-drying of less thick boards; ii) the range of average moisture content among boards (2.5 p.p.) was satisfactory for a drying process carried out without environment control. Length moisture content gradient was completely different from that reported in literature, in which no board tops had smaller moisture content than the parts comprehended in between the tops.