Powder Plasma Spheroidization and the Characterization of SS 316L Powder and L-PBF Builds
收藏Mendeley Data2026-04-09 收录
相关数据集
2319铝合金电弧熔丝增材制造件S-N曲线、断裂韧性、裂纹扩展试验报告
数据集来源于课题《大型客机和民用航天高强铝合金构件增材制造适航符合性验证和可靠性研究》。根据适航符合性验证要求，规划试样级材料力学性能试验矩阵，开展静力、疲劳和断裂韧性等性能试验，获取高强度铝合金增材制造材料性能基础数据，并结合多尺度建模方法，研究确定增材制造结构设计许用值的通用方法。数据采集时间为：2020.09~2021.04；采集单位为：上海航空材料结构检测股份有限公司；采集设备、试验环境、
国家基础学科公共科学数据中心130
Data: Effect of substrate alloy type on the hardness profile of the substrate and deposited material interface in Aluminium Wire + Arc Additive Manufacturing
This file provides the hardness measurements used in the paper to plot the different hardness profiles in figures 3 and 9 and the chemical composition measurement displayed in figure 10.
DataCite Commons2023-08-14 更新90
Hot Isostatic Pressing of Ultrasonic Additive Manufacturing Liquid Cold Plate Heat Exchangers
The aim of this paper is to discuss the improved performance of an AA 6061 Ultrasonic Additive Manufacturing (UAM) heat exchanger device through the use of traditional hot isostatic pressing (HIP) and
DataCite Commons2024-05-07 更新70
Precipitate Size in GRCop-84 Gas Atomized Powder and Laser Powder Bed Fusion Additively Manufactured Material
Data for: Precipitate Size in GRCop-84 Gas Atomized Powder and Laser Powder Bed Fusion Additively Manufactured Material
NIAID Data Ecosystem100
Metal Powder Handling Systems Market
The Metal Powder Handling Systems report features an extensive regional analysis, identifying market penetration levels across major geographic areas. It highlights regional growth trends and opportun
IMR REPORTS90
