路基路面压实度检测数据

数据用途和场景：路基路面压实度检测能够反应各个项目中各路基路面压实度检测是否符合规范，在路基路面质量上进行把控，对相关工程的安全性上具有积极意义。路基路面压实度计算公式：压实度=干密度/最大干密度，干密度=（试坑中挖出湿料质量/试坑体积）/(1+0.01*含水率)。将以上数据以JTG 3450-2019标准计算，计算后与标准的性能指标对比判断是否合格。

Data Purpose and Application Scenarios: Subgrade and pavement compaction detection is employed to verify whether the compaction degree of each subgrade and pavement section in various engineering projects complies with relevant specifications, supervise the quality of subgrades and pavements, and exert positive effects on the safety of related engineering projects. The calculation formulas for subgrade and pavement compaction degree are as follows:
Compaction Degree = Dry Density / Maximum Dry Density,
Dry Density = (Mass of wet material excavated from the test pit / Volume of the test pit) / (1 + 0.01 × Moisture Content).
All measured data required for the above calculations shall be calculated in accordance with the JTG 3450-2019 standard, and the resulting values will be compared with the standard performance indicators to determine whether the compaction quality is qualified.

搜集汇总

数据集介绍

特点

该数据集包含101条路基路面压实度检测数据，每月更新，用于检测路基路面压实度是否符合规范，确保工程质量。数据包括试坑中挖出湿料质量、试坑体积、平均含水率、干密度、最大干密度和压实度等关键指标，并依据JTG 3450-2019标准进行计算和判断。