Data accompanying Chapter 3 of the PhD Dissertation: Methanol Sprays in Marine Internal Combustion Engines: A Computational Fluid Dynamics Approach

<strong>Introduction</strong>This dataset contains the results and inputs files collected as part of the Chapter 3 in the doctoral thesis of Mr. Konstantinos Zoumpourlos, Dipl.-Ing in Delft University of Technology, 2022-2026.The present dataset is made public to act both as supplementary data for the publications of K. Zoumpourlos and to offer other researchers the ability to use this data in their own work.This data is part of the MENENS project (Methanol als Energiestap Naar Emissieloze Nederlandse Scheepvaart).The project is funded by the Netherlands Enterprise Agency (RVO: Rijksdienst voor Ondernemend Nederland) under the grant number MOB21012.<br><strong>Purpose of the dataset</strong>The purpose of these simulations is to recreate the spray formation in port fuel injection (PFI) environments in the context of marine engine conditions. The results replicated two experimental conditions from the literature using both high and low injection pressure.<br><strong>Description of the dataset</strong>Input files for the CFD baseline validation and 3 marine case study simulations conducted in CONVERGE-CFD 3.0.Additional mean-value 0D and 3D spatial data are included for the simulation cases.The validation cases are denoted by the zip file name including the injection pressure and the ambient pressure environment corresponding to each individual simulation case. Inside each directory, the input files (.dat and .in files), 0D results (text format .out files) and 3D results (text format .h5 files) are denoted by their respective directory names.<br><strong>Dependencies</strong>To open the simulation input files CONVERGE 3.0 is needed. However, for the inspection of the modelling constants, initial &amp; boundary conditions, it is possible to use a text editor to read the inputs. The 0D simulation results can be opened using Excel, Matlab, or other table reading software. Lastly, the 3D output files can be accessed using any CFD post-processing software such as Paraview, Tecplot, etc.