Geothermal Project on TU Delft Campus – DEL-GT-01 core CT-scan data

A total of ~86 m of core were recovered from the producer well DELGT-01, of which 70 m are in a continuous sequence. The purpose was to core the caprock and the upper reservoir deposits. Cores have a diameter of 4 inches and were cut into 1 meter long sections. Each section have been preserved and stabilized within their barrels by injecting foam, and sealing the cores with a wax and a vacuum pack, comprising aluminum and plastic layers to reduce water and oxygen leaving or entering the cores. Prior to any physical or destructive testing on the cores, all preserved 1-meter long cores were scanned in the Geoscience and Engineering Laboratory using the medical CT scanner (Siemens Somatom Volume Zoom CT scanner).<br>The full End-of-well science programme report can be found <strong>here</strong>.<br>A full description of the data set is in the <strong>README.docx</strong> file.Acquisition parameters are described in the file <strong>DELGT01-cores-macroCT-public.xlsx</strong>.A guide to load these data with open-source software is described in <strong>How To Macro CT Scroll Through.pdf</strong>. Representative axial images produced with the guide <strong>CT scans Cores DELGT01.pdf</strong>.