Numerical data on the cutting depth and time of reinforced concrete in dismantling reinforced concrete using steam pressure cracking agent SPC.

Numerical cutting data that were obtained by drilling 11 mm diameter（D10 class）rebar in concrete using three types of rake angle bits (- 0°, -20°, -60°) at the tip of a small rock drill with a power of 2.24 kW. Each cut takes less tha 17 seconds, and is repeated 5 times befor pausing th allow the compressor to inrease pressure. Thses intervals are repeated. The first interval is 1-1 to 1-5 and the second interval is 2-1 to 2-5. Total interval times is 17 for -0° tool rake angle.

通过在混凝土中钻孔获取的数值切割数据，钻孔直径为11毫米（D10等级）钢筋，采用三种类型的切削角度刀具（-0°、-20°、-60°）在小型岩石钻头尖端进行操作，钻头功率为2.24千瓦。每次切割耗时少于17秒，重复5次后暂停，以便压缩机增加压力。这些间隔重复进行。第一个间隔为1-1至1-5，第二个间隔为2-1至2-5。在-0°刀具切削角度下，总间隔时间为17秒。