Robotized Noncontact Open-Space Mapping of Volatile Organic Compounds Emanating from Solid Specimens

Analysis of volatile organic compounds (VOCs) is normally preceded by sample homogenization and solvent extraction. This methodology does not provide spatial resolution of the analyzed VOCs in the examined matrix. Here, we present a robotized pen-shaped probe for open-space sampling and mapping of VOCs emanating from solid specimens (dubbed “PENVOC”). The system combines vacuum-assisted suction probe, mass spectrometry, and robotic handling of the probe. The VOCs are scavenged from the sample surface by a gentle hydrodynamic flow of air sustained by a vacuum pump. The sampled gas is transferred to the proximity of corona discharge in an atmospheric pressure chemical ionization source of a tandem mass spectrometer. The PENVOC has been attached to a robotic arm to enable unattended scanning of flat surfaces. The specimens can be placed away from the mass spectrometer during the scan. The robotized PENVOC has been characterized using chemical standards (benzaldehyde, limonene, 2-nonanone, and ethyl octanoate). The limits of detection are in the range from 2.33 × 10–5 to 2.68 × 10–4 mol m–2. The platform has further been used for mapping of VOCs emanating from a variety of specimens: flowers, glove exposed to smoke, fuel stains, worn medical face mask, worn clothing, cheese, ham, and fruits. The chemical maps show unique distributions of the VOCs on the scanned surfaces. Obtaining comparable results (VOC maps) using other techniques (e.g., repetitive headspace sampling prior to offline analysis) would be time-consuming. The presented mapping technique may find applications in environmental, forensic, and food science.