有没有相关的论文或文献参考？
这个数据集是基于什么背景创建的？
数据集的作者是谁？
能帮我联系到这个数据集的作者吗？
这个数据集如何下载？
NCC NorESM2-LM model output prepared for CMIP6 CDRMIP esm-pi-cdr-pulse|气候模型数据集|地球系统科学数据集
收藏DataCite Commons2024-08-30 更新2025-04-15 收录
下载链接：
http://cera-www.dkrz.de/WDCC/meta/CMIP6/CMIP6.CDRMIP.NCC.NorESM2-LM.esm-pi-cdr-pulse
下载链接
链接失效反馈资源简介：
Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets: These data include all datasets published for 'CMIP6.CDRMIP.NCC.NorESM2-LM.esm-pi-cdr-pulse' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The NorESM2-LM (low atmosphere-medium ocean resolution, GHG concentration driven) climate model, released in 2017, includes the following components: aerosol: OsloAero, atmos: CAM-OSLO (2 degree resolution; 144 x 96; 32 levels; top level 3 mb), atmosChem: OsloChemSimp, land: CLM, landIce: CISM, ocean: MICOM (1 degree resolution; 360 x 384; 70 levels; top grid cell minimum 0-2.5 m [native model uses hybrid density and generic upper-layer coordinate interpolated to z-level for contributed data]), ocnBgchem: HAMOCC, seaIce: CICE. The model was run by the NorESM Climate modeling Consortium consisting of CICERO (Center for International Climate and Environmental Research, Oslo 0349), MET-Norway (Norwegian Meteorological Institute, Oslo 0313), NERSC (Nansen Environmental and Remote Sensing Center, Bergen 5006), NILU (Norwegian Institute for Air Research, Kjeller 2027), UiB (University of Bergen, Bergen 5007), UiO (University of Oslo, Oslo 0313) and UNI (Uni Research, Bergen 5008), Norway. Mailing address: NCC, c/o MET-Norway, Henrik Mohns plass 1, Oslo 0313, Norway (NCC) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, atmosChem: 250 km, land: 250 km, landIce: 250 km, ocean: 100 km, ocnBgchem: 100 km, seaIce: 100 km. Project: These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. - Project website: https://pcmdi.llnl.gov/CMIP6.
提供机构：
Earth System Grid Federation
创建时间：
2020-03-23
数据主题
5,000+
优质数据集
54 个
任务类型
进入经典数据集
热门数据集
aqcat25
<h1 align="center" style="font-size: 36px;"> <span style="color: #FFD700;">AQCat25 Dataset:</span> Unlocking spin-aware, high-fidelity machine learning potentials for heterogeneous catalysis </h1>  This repository contains the **AQCat25 dataset**. AQCat25-EV2 models can be accessed [here](https://huggingface.co/SandboxAQ/aqcat25-ev2). The AQCat25 dataset provides a large and diverse collection of **13.5 million** DFT calculation trajectories, encompassing approximately 5K materials and 47K intermediate-catalyst systems. It is designed to complement existing large-scale datasets by providing calculations at **higher fidelity** and including critical **spin-polarized** systems, which are essential for accurately modeling many industrially relevant catalysts. Please see our [website](https://www.sandboxaq.com/aqcat25) and [paper](https://cdn.prod.website-files.com/622a3cfaa89636b753810f04/68ffc1e7c907b6088573ba8c_AQCat25.pdf) for more details about the impact of the dataset and [models](https://huggingface.co/SandboxAQ/aqcat25-ev2). ## 1. AQCat25 Dataset Details This repository uses a hybrid approach, providing lightweight, queryable Parquet files for each split alongside compressed archives (`.tar.gz`) of the raw ASE database files. More details can be found below. ### Queryable Metadata (Parquet Files) A set of Parquet files provides a "table of contents" for the dataset. They can be loaded directly with the `datasets` library for fast browsing and filtering. Each file contains the following columns: | Column Name | Data Type | Description | Example | | :--- | :--- | :--- | :--- | | `frame_id` | string | **Unique ID for this dataset**. Formatted as `database_name::index`. | `data.0015.aselmdb::42` | | `adsorption_energy`| float | **Key Target**. The calculated adsorption energy in eV. | -1.542 | | `total_energy` | float | The raw total energy of the adslab system from DFT (in eV). | -567.123 | | `fmax` | float | The maximum force magnitude on any single atom in eV/Å. | 0.028 | | `is_spin_off` | boolean | `True` if the system is non-magnetic (VASP ISPIN=1). | `false` | | `mag` | float | The total magnetization of the system (µB). | 32.619 | | `slab_id` | string | Identifier for the clean slab structure. | `mp-1216478_001_2_False` | | `adsorbate` | string | SMILES or chemical formula of the adsorbate. | `*NH2N(CH3)2` | | `is_rerun` | boolean | `True` if the calculation is a continuation. | `false` | | `is_md` | boolean | `True` if the frame is from a molecular dynamics run. | `false` | | `sid` | string | The original system ID from the source data. | `vadslabboth_82` | | `fid` | integer | The original frame index (step number) from the source VASP calculation. | 0 | --- #### Understanding `frame_id` and `fid` | Field | Purpose | Example | | :--- | :--- | :--- | | `fid` | **Original Frame Index**: This is the step number from the original VASP relaxation (`ionic_steps`). It tells you where the frame came from in its source simulation. | `4` (the 5th frame of a specific VASP run) | | `frame_id` | **Unique Dataset Pointer**: This is a new ID created for this specific dataset. It tells you exactly which file (`data.0015.aselmdb`) and which row (`101`) to look in to find the full atomic structure. | `data.0015.aselmdb::101` | --- ## Downloadable Data Archives The full, raw data for each split is available for download in compressed `.tar.gz` archives. The table below provides direct download links. The queryable Parquet files for each split can be loaded directly using the `datasets` library as shown in the "Example Usage" section. The data currently available for download (totaling ~11.1M frames, as listed in the table below) is the initial dataset version (v1.0) released on September 10, 2025. The 13.5M frame count mentioned in our paper and the introduction includes additional data used to rebalance non-magnetic element systems and add a low-fidelity spin-on dataset. These new data splits will be added to this repository soon. | Split Name | Structures | Archive Size | Download Link | | :--- | :--- | :--- | :--- | | ***In-Domain (ID)*** | | | | | Train | `7,386,750` | `23.8 GB` | [`train_id.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/train_id.tar.gz) | | Validation | `254,498` | `825 MB` | [`val_id.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/val_id.tar.gz) | | Test | `260,647` | `850 MB` | [`test_id.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/test_id.tar.gz) | | Slabs | `898,530` | `2.56 GB` | [`id_slabs.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/id_slabs.tar.gz) | | ***Out-of-Distribution (OOD) Validation*** | | | | | OOD Ads (Val) | `577,368` | `1.74 GB` | [`val_ood_ads.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/val_ood_ads.tar.gz) | | OOD Materials (Val) | `317,642` | `963 MB` | [`val_ood_mat.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/val_ood_mat.tar.gz) | | OOD Both (Val) | `294,824` | `880 MB` | [`val_ood_both.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/val_ood_both.tar.gz) | | OOD Slabs (Val) | `28,971` | `83 MB` | [`val_ood_slabs.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/val_ood_slabs.tar.gz) | | ***Out-of-Distribution (OOD) Test*** | | | | | OOD Ads (Test) | `346,738` | `1.05 GB` | [`test_ood_ads.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/test_ood_ads.tar.gz) | | OOD Materials (Test) | `315,931` | `993 MB` | [`test_ood_mat.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/test_ood_mat.tar.gz) | | OOD Both (Test) | `355,504` | `1.1 GB` | [`test_ood_both.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/test_ood_both.tar.gz) | | OOD Slabs (Test) | `35,936` | `109 MB` | [`test_ood_slabs.tar.gz`](https://huggingface.co/datasets/SandboxAQ/aqcat25-dataset/resolve/main/test_ood_slabs.tar.gz) | --- ## 2. Dataset Usage Guide This guide outlines the recommended workflow for accessing and querying the AQCat25 dataset. ### 2.1 Initial Setup Before you begin, you need to install the necessary libraries and authenticate with Hugging Face. This is a one-time setup. ```bash pip install datasets pandas ase tqdm requests huggingface_hub ase-db-backends ``` **1. Create a Hugging Face Account:** If you don't have one, create an account at [huggingface.co](https://huggingface.co/join). **2. Create an Access Token:** Navigate to your **Settings -> Access Tokens** page or click [here](https://huggingface.co/settings/tokens). Create a new token with at least **`read`** permissions. Copy this token to your clipboard. **3. Log in via the Command Line:** Open your terminal and run the following command: ```bash hf auth login ``` ### 2.2 Get the Helper Scripts You may copy the scripts directly from this repository, or download them by running the following in your local python environment: ```python from huggingface_hub import snapshot_download snapshot_download( repo_id="SandboxAQ/aqcat25", repo_type="dataset", allow_patterns=["scripts/*", "README.md"], local_dir="./aqcat25" ) ``` This will create a local folder named aqcat25 containing the scripts/ directory. ### 2.3 Download Desired Dataset Splits Data splits may be downloaded directly via the Hugging Face UI, or via the `download_split.py` script (found in `aqcat25/scripts/`). ```bash python aqcat25/scripts/download_split.py --split val_id ``` This will download `val_id.tar.gz` and extract it to a new folder named `aqcat_data/val_id/`. ### 2.4 Query the Dataset Use the `query_aqcat.py` script to filter the dataset and extract the specific atomic structures you need. It first queries the metadata on the Hub and then extracts the full structures from your locally downloaded files. **Example 1: Find all CO and OH structures in the test set:** ```bash python aqcat25/scripts/query_aqcat.py \ --split test_id \ --adsorbates "*CO" "*OH" \ --data-root ./aqcat_data/test_id ``` **Example 2: Find structures on metal slabs with low adsorption energy:** ```bash python aqcat25/scripts/query_aqcat.py \ --split val_ood_both \ --max-energy -2.0 \ --material-type nonmetal \ --magnetism magnetic \ --data-root ./aqcat_data/val_ood_both \ --output-file low_energy_metals.extxyz ``` **Example 3: Find CO on slabs containing both Ni AND Se with adsorption energy between -2.5 and -1.5 eV with a miller index of 011** ```bash python aqcat25/scripts/query_aqcat.py \ --split val_ood_ads \ --adsorbates "*COCH2OH" \ --min-energy -2.5 \ --max-energy -1.5 \ --contains-elements "Ni" "Se" \ --element-filter-mode all \ --facet 011 \ --data-root ./aqcat_data/val_ood_ads \ --output-file COCH2OH_on_ni_and_se.extxyz ``` --- ## 3. How to Cite If you use the AQCat25 dataset or the models in your research, please cite the following paper: ``` Omar Allam, Brook Wander, & Aayush R. Singh. (2025). AQCat25: Unlocking spin-aware, high-fidelity machine learning potentials for heterogeneous catalysis. arXiv preprint arXiv:XXXX.XXXXX. ``` ### BibTeX Entry ```bibtex @article{allam2025aqcat25, title={{AQCat25: Unlocking spin-aware, high-fidelity machine learning potentials for heterogeneous catalysis}}, author={Allam, Omar and Wander, Brook and Singh, Aayush R}, journal={arXiv preprint arXiv:2510.22938}, year={2025}, eprint={2510.22938}, archivePrefix={arXiv}, primaryClass={cond-mat.mtrl-sci} } ```
魔搭社区 收录
HaluMem-Medium, HaluMem-Long
HaluMem数据集旨在评估记忆系统中存在的幻觉现象。该数据集由MemTensor (上海) 科技和哈尔滨工程大学联合构建，包含约15,000个记忆点，以及超过3,400个评估查询。每个用户的平均对话轮数为1,000轮以上，最长对话长度可达百万级Tokens，能够全面评估不同上下文规模和任务复杂度下的幻觉行为。
arXiv 收录
中国劳动力动态调查
“中国劳动力动态调查” （China Labor-force Dynamics Survey，简称 CLDS）是“985”三期“中山大学社会科学特色数据库建设”专项内容，CLDS的目的是通过对中国城乡以村/居为追踪范围的家庭、劳动力个体开展每两年一次的动态追踪调查，系统地监测村/居社区的社会结构和家庭、劳动力个体的变化与相互影响，建立劳动力、家庭和社区三个层次上的追踪数据库，从而为进行实证导向的高质量的理论研究和政策研究提供基础数据。
中国学术调查数据资料库 收录
WorldClim
WorldClim是一个全球气候数据集，提供了全球范围内的气候数据，包括温度、降水、生物气候变量等。数据集的分辨率从30秒到10分钟不等，适用于各种尺度的气候分析和建模。
www.worldclim.org 收录
中国沿海地面沉降数据数据库（2015，2020）
数据来源https://doi.org/10.1038/s41467-022-34525-w。由于缺少详细公开的中国沿海地区地面升降数据，本数据集是通过系统的文献综述，对中国沿海地区的地面升降进行了详细整理，建立了中国沿海城市地面沉降数据库，包括中国沿海城市不同时段沉降速率以及测量手段。所用文献主要来源于CNKI文献数据库、Web of Science，以及灰色文献（Grey literature），如报告、规划等。该数据可用于相对海平面变化研究，沿海极值水位和海岸洪水危险性研究，为沿海地面沉降防控以及沿海适应性措施规划等提供参考和依据。
国家青藏高原科学数据中心 收录