Engineering properties of Seawater-mixed LWAC

The following files consists of data from the original article "Seawater-Mixed Lightweight Aggregate Concretes with Dune Sand, Waste Glass and Nanosilica: Experimental and Life Cycle Analysis" published in International Journal of Concrete Structures and Materials. The files are sequenced in the order of appearance of data from the article.  The worksheets in the uploaded file consists of data from the tests consistency, oven-dry density, thermal conductivity, open porosity, water absorption coefficient, and strength (2, 7, and 28 days) conducted on seawater-mixed light weight concretes. Also, the particle size distribution data of the raw materials used in this study is also included.  The values are presented with units mentioned in appropriate locations. 
Sheet 1: Particle size distribution of raw materials
Sheet 2: Slump flow data (Fresh state)
Sheet 3: Compressive strength data (@ 2, 7, and 28 days)
Sheet 4: Oven dry density data (@ 28 days)
Sheet 5: Open porosity data (@ 28 days)
Sheet 6: Thermal conductivity data (@ 28 days)
Sheet 7: Water absorption coefficient data (@ 28 days)
Link to access the published article at the source: https://link.springer.com/article/10.1186/s40069-023-00613-4
Specimen ID description: 
QTW0 - CEM III with quartz sand (Tap water mixing)
QTW3 - CEM III + 3% nano-Silica with quartz sand (Tap water mixing)
QSW0 - CEM III with quart sand (Seawater mixing)
QSW3 - CEM III + 3% nano-Silica with quartz sand (Seawater mixing)
GTW0 - CEM III with crushed glass aggregate (Tap water mixing)
GTW3 - CEM III + 3% nano-Silica with crushed glass aggregate (Tap water mixing)
GSW0 - CEM III with crushed glass aggregate (Seawater mixing)
GSW3 - CEM III + 3% nano-Silica with crushed glass aggregate (Seawater mixing)
DTW0 - CEM III with dune sand (Tap water mixing)
DTW3 - CEM III + 3% nano-Silica with dune sand (Tap water mixing)
DSW0 - CEM III with dune sand (Seawater mixing)
DSW3 - CEM III + 3% nano-Silica with dune sand (Seawater mixing)

PS - The attached file could be opened only with ORIGIN 2021b or any other compatible versions of the same software