Theoretical screening of dielectric/metal mirrors for enhanced photon recycling in GaAs solar cells

Dielectrics are often employed for high-reflectivity mirrors in semiconductor devices, since they leverage total
internal reflection to reduce optical losses at semiconductor/metal interfaces. In this work, we investigate the
impact of a range of dielectrics (ZnS, Si3N4
, Al2O3
, SiO2
, MgF2
, air) on mirror reflectivity, photon recycling
probability and open-circuit voltage (𝑉𝑜𝑐 ) in thin-film GaAs solar cells with Au- or Ag-based mirrors. The
impact of transition metal adhesion layers is investigated, as well as the influence of the dielectric and active
layer thickness. It is found that the 𝑉𝑜𝑐 benefit of using a dielectric/metal mirror compared to a bare metal
mirror (𝛥𝑉𝑜𝑐 ) is small (≤10 mV) when the internal luminescent efficiency 𝜂𝑖𝑛𝑡 is lower than 0.95 for all mirror
architectures investigated. Only in very-high-quality cells, 𝛥𝑉𝑜𝑐 becomes significant, reaching ∼30 mV at 𝜂𝑖𝑛𝑡 =
1 when using a 250-nm air-gap to enhance the reflectivity of a lossy Au mirror. This shows that dielectric/metal
rear mirrors only provide significant 𝑉𝑜𝑐 benefits when 𝜂𝑖𝑛𝑡 is very close to unity. Furthermore, we find that for
lossy mirrors, transition metal adhesion layers do not have a strong impact on 𝛥𝑉𝑜𝑐 , while for highly reflective
mirrors like Ag, adhesion layers thicker than 1 nm are found to be detrimental to the already small 𝑉𝑜𝑐 gains.
Lastly, 𝛥𝑉𝑜𝑐 is shown to be higher in cells with thinner active layers and in cells with planar compared to
textured mirrors. In textured cells, however, the short-circuit current density and thereby the power conversion
efficiency are affected more strongly by incorporating a dielectric into the rear mirror.

This dataset contains raw data obtained from measurements, that was used to produce the figures in the publication, as well as the figures themselves.