FLORIDyn (OFF toolbox) Code and input files underlying the publication: Wind pattern clustering of high frequent field measurements for dynamic wind farm flow control

Python implementation of the FLORIDyn code [1] in the OFF toolbox, as well as the input files used for the publication "Wind pattern clustering of high frequent field measurements for dynamic wind farm flow control", M Becker, D Allaerts and JW van Wingerden, in preparation for the TORQUE 2024 conference.<br>The yaml files contain the baseline orientation (misalignment angle = 0 deg) and optimised angles. The C1 to C5 addition in the name refers to the wind direction change case that is investigated. The optimised angles have beed derived using FLORIS [2] and are given in separate files for convenience.<br>To run the code FLORIS [2] needs to be installed. In addition the DTU 10MW reference turbine [3] is used in the simulations. The required .yaml is provided with this code and needs to be added to the FLORIS turbine library. Go to 03_Code/main.py and run the selected case.<br>The farm power of all simulations in FLORIDyn in given in the files FarmPower*.csvTo use them in Matlab, call:<br>farm_pow = readmatrix("FarmPowerNoYaw.csv");farm_pow = reshape(farm_pow, 5, length(1:2:359), [] );<br>Dimension 1 is along the cases, dimension 2 along the wind directions and dimension 3 along time (4:4:2000).E.g. to plot the power for case C4 starting at 201deg callplot(4:4:2000, farm_pow(4, (201+1)/2, :))<br>[1] https://iopscience.iop.org/article/10.1088/1742-6596/2265/3/032103/meta[2] https://github.com/NREL/floris[3] https://backend.orbit.dtu.dk/ws/portalfiles/portal/55645274/The_DTU_10MW_Reference_Turbine_Christian_Bak.pdf