ACTGOV Streetlight Cable Assets

This polyline dataset shows the locations of Overhead and Underground Streetlight Cables in the Australian Capital Territory. These assets are either owned or managed by City Services, City and Environment Directorate (CED). Assets managed and / or owned privately, by other ACT Government Directorates or by the Federal Government may not be included. The streetlight cables are overhead or buried underground and carry the electrical load to power the streetlight network. There are different types of cables based on the load required to power each streetlight thus higher voltage cables are generally encased in a thicker conduit. The cables are connected to a circuit which is controlled at a controller box. The dataset includes streetlight cables from ActewAGL’s database as of June 30th 2017 in addition to new cables that have been handed over to the ACT Government since then. Attributes include location description, suburb, ownership, maintained by, asset sub type (Overhead Cable, Underground Cable), cable type and conduit, voltage (LOW or HIGH), the status of the cable (ABANDONED or IN SERVICE), when it was installed and the reference information for the source of the data. The cable length is based off the spatial geometry of each feature. These assets are captured and maintained in the CED asset database through the works as executed (WAE) handover process or field audits. The information available in this dataset may be incomplete and should not be solely relied upon as a search. Cable locations / alignments generally represent indicative routes rather than being survey accurate. No warranty is given in relation to the data (including accuracy, reliability, completeness or suitability) and no liability accepted (including without limitation, liability in negligence) for any loss damage or costs (including consequential damage) relating to any use of the data. Minor to substantial delays may occur in updating the source data to reflect as-constructed information. This data is generally used for the Dial Before You Dig (DBYD) service and should be used as a guide only. For additional information, please see the relevant municipal infrastructure standard (https://www.cityservices.act.gov.au/plan-and-build/standards-codes-and-guidelines/municipal-infrastructure-design-standards-mis).本折线数据集展示了澳大利亚首都领地（Australian Capital Territory, ACT）内架空路灯电缆与地下路灯电缆的分布位置。此类资产均由城市与环境局（City and Environment Directorate，简称CED）下属城市服务部门持有或运维。由其他ACT政府部门、联邦政府或私人持有或运维的资产未纳入本数据集。 路灯电缆分为架空与地下埋设两种类型，用于为路灯网络输送电力负荷。根据为单盏路灯供电所需的负荷等级，电缆分为多种规格：通常高压电缆会包裹在更厚的防护导管中。所有电缆均接入对应回路，并由控制箱统一管控。 本数据集包含截至2017年6月30日的ActewAGL数据库内的路灯电缆数据，以及此后移交至ACT政府的新增电缆数据。数据集包含以下属性：位置描述、所在郊区、权属单位、运维主体、资产子类型（架空电缆、地下电缆）、电缆类型与导管规格、电压等级（低压/高压）、电缆状态（废弃/在用）、安装日期以及数据来源参考信息。 电缆长度基于各要素的空间几何特征计算得出。此类资产通过竣工移交（Works as Executed，简称WAE）流程或现场审计的方式，被录入并维护于CED资产数据库中。 本数据集所载信息可能存在不完整之处，不可单独将其作为检索依据。电缆的位置与走向仅为示意性路线，并非经勘测的精准点位。 本数据集不提供任何形式的保证（包括但不限于准确性、可靠性、完整性与适用性），且不对因使用本数据导致的任何损失、损害或成本（包括间接损害）承担任何责任（包括但不限于过失责任）。 在更新源数据以反映实际竣工信息时，可能出现从轻微到严重的延迟。 本数据主要用于开挖前咨询（Dial Before You Dig，简称DBYD）服务，仅可作为参考指南使用。如需获取更多信息，请参阅相关市政基础设施设计标准：https://www.cityservices.act.gov.au/plan-and-build/standards-codes-and-guidelines/municipal-infrastructure-design-standards-mis