DOE1 and DOE2 - Sensor data set radial forging at AFRC testbed

<strong>Sensor data set, radial forging at AFRC testbed</strong> <strong>General information on the data set</strong> Radial forging is widely used in industry to manufacture components for a broad range of sectors including automotive, medical, aerospace, rail and industrial. The Advanced Forming Research Centre (AFRC) at the University of Strathclyde, Glasgow, houses a GFM SKK10/R radial forge that has been used as a testbed for this project. Using two pairs of hammers operating at 1200 strokes/min, and providing a maximum forging force per hammer of 150 tons, the radial forge is capable of processing a range of metals, including steel, titanium and inconel. Both hollow and solid material can be formed with the added benefit of creating internal features on hollow parts using a mandrel. Parts can be formed at a range of temperatures from ambient temperature to 1200 °C. For the provided data set, a total of 95 parts were forged over two days of operation. Each part was forged with machine parameters outlined in the file <code>Met4FoF STRATH test plan v4.xlsx</code>. Deviations from the test plan occurred during the second batch and are outline in the sheet <code>Batch 2</code>. Each forged part was then measured using a CMM to provide dimensional output relative to a target specification and tolerances. T<strong>he CMM records 16 dimensional measurements</strong>. The aim of the measurement setup is to predict the quality (in terms of dimensional properties) of the forged part from the sensor measurements during the forging process. <strong>Structure of the data</strong> The sensor readings for the forging of the parts are provided in csv files in the folders <code>ScopeTraces_DOE1</code> and <code>ScopeTraces_DOE2</code> for DOE1 and DOE2 respectively. For DOE1 the scope traces are named <code>Scope0001.csv</code> to <code>Scope0050.csv</code>. For DOE2 there were deviations and the Scope Traces to billet mapping is outlined in <code>Met4FoF STRATH test plan v4.xlsx</code>. Each file contains the readings (columns) against time (rows). The first column displays the clock times (in milliseconds). A commentary on the sensors is provided in the file <code>ForgedPartDataStructureSummaryv3.xlsx </code>(NOTE: Some columns do not have sensor descriptions as this information is not available). The CMM data is provided in the file <code>CMM_DOE1.xlsx</code> and <code>CMM_DOE2.xlsx</code> for DOE1 and DOE2 respectively.