Mapped Planned Land Use - Open Data

Status: COMPLETED 2010. The data was converted from the most recent (2010) versions of the adopted plans, which can be found at https://cms3.tucsonaz.gov/planning/plans/ Supplemental Information: In March 2010, Pima Association of Governments (PAG), in cooperation with the City of Tucson (City), initiated the Planned Land Use Data Conversion Project. This 9-month effort involved evaluating mapped land use designations and selected spatially explicit policies for nearly 50 of the City's adopted neighborhood, area, and subregional plans and converting the information into a Geographic Information System (GIS) format. Further documentation for this file can be obtained from the City of Tucson Planning and Development Services Department or Pima Association of Governments Technical Services. A brief summary report was provided, as requested, to the City of Tucson which highlights some of the key issues found during the conversion process (e.g., lack of mapping and terminology consistency among plans). The feature class "Plan_boundaries" represents the boundaries of the adopted plans. The feature class "Plan_mapped_land_use" represents the land use designations as they are mapped in the adopted plans. Some information was gathered that is implicit based on the land use designation or zones (see field descriptions below). Since this information is not explicitly stated in the plans, it should only be viewed by City staff for general planning purposes. The feature class "Plan_selected_policies" represents the spatially explicit policies that were fairly straightforward to map. Since these policies are not represented in adopted maps, this feature class should only be viewed by City staff for general planning purposes only. 2010 - created by Jamison Brown, working as an independent contractor for Pima Association of Governments, created this file in 2010 by digitizing boundaries as depicted (i.e. for the mapped land use) or described in the plans (i.e. for the narrative policies). In most cases, this involved tracing based on parcel (paregion) or street center line (stnetall) feature classes. Snapping was used to provide line coincidence. For some map conversions, freehand sketches were drawn to mimick the freehand sketches in the adopted plan. Field descriptions for the "Plan_mapped_land_use" feature class: Plan_Name: Plan name Plan_Type: Plan type (e.g., Neighborhood Plan) Plan_Num: Plan number LU_DES: Land use designation (e.g., Low density residential) LISTED_ALLOWABLE_ZONES: Allowable zones as listed in the Plan LISTED_RAC_MIN: Minimum residences per acre (if applicable), as listed in the Plan LISTED_RAC_TARGET: Target residences per acre (if applicable), as listed in the Plan LISTED_RAC_MAX: Maximum residences per acre (if applicable), as listed in the Plan LISTED_FAR_MIN: Minimum Floor Area Ratio (if applicable), as listed in the Plan LISTED_FAR_TARGET: Target Floor Area Ratio (if applicable), as listed in the Plan LISTED_FAR_MAX: Maximum Floor Area Ratio (if applicable), as listed in the Plan BUILDING_HEIGHT_MAX Building height maximum (ft.) if determined by Plan policy IMPORTANT: A disclaimer about the data as it is unofficial. URL: Uniform Resource Locator IMPLIED_ALLOWABLE_ZONES: Implied (not listed in the Plan) allowable zones IMPLIED_RAC_MIN: Implied (not listed in the Plan) minimum residences per acre (if applicable) IMPLIED_RAC_TARGET: Implied (not listed in the Plan) target residences per acre (if applicable) IMPLIED_RAC_MAX: Implied (not listed in the Plan) maximum residences per acre (if applicable) IMPLIED_FAR_MIN: Implied (not listed in the Plan) minimum Floor Area Ratio (if applicable) IMPLIED_FAR_TARGET: Implied (not listed in the Plan) target Floor Area Ratio (if applicable) IMPLIED_FAR_MAX: Implied (not listed in the Plan) maximum Floor Area Ratio (if applicable) IMPLIED_LU_CATEGORY: Implied (not listed in the Plan) general land use category. General categories used include residential, office, commercial, industrial, and other. Purpose Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Dataset Classification Level 0 - Open Known Uses Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Known Errors Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Data Contact John Beall City of Tucson Development Services 520-791-5550 [e-mail] Update Frequency Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.状态：2010年已完成。本数据集由最新版（2010年）获批规划方案转换而来，相关方案可通过https://cms3.tucsonaz.gov/planning/plans/ 获取。 补充信息：2010年3月，皮马地区政府协会（Pima Association of Governments, PAG）与图森市（City of Tucson）合作启动了规划用地数据转换项目。该项目历时9个月，对本市近50份获批的社区、片区及次区域规划中的已映射土地用途标识与选定的空间显性政策进行评估，并将相关信息转换为地理信息系统（Geographic Information System, GIS）格式。 本数据集的进一步文档可通过图森市规划与发展服务部或皮马地区政府协会技术服务部门获取。应本市要求，已提交一份简要总结报告，其中梳理了转换过程中发现的部分关键问题（例如各规划间存在制图标准与术语不一致的情况）。 要素类（feature class）"Plan_boundaries"代表获批规划的边界范围。要素类（feature class）"Plan_mapped_land_use"代表获批规划中已映射的土地用途标识。部分信息为基于土地用途标识或分区推导得出的隐含信息（详见下文字段说明）。由于此类信息未在规划文本中明确载明，仅可供本市工作人员用于通用规划工作。 要素类（feature class）"Plan_selected_policies"代表易于制图的空间显性政策。由于此类政策未在获批地图中体现，该要素类仅可供本市工作人员用于通用规划工作。 本文件由Jamison Brown于2010年创建，其当时为皮马地区政府协会的独立承包商，依据规划中描绘的内容（如映射的土地用途）或文字描述（如叙事性政策）进行边界数字化作业。多数情况下，需基于宗地（parcel，原文标注为paregion）或街道中心线（street center line，原文标注为stnetall）要素类进行描边，并通过吸附（snapping）操作实现线条重合。部分地图转换工作中，需绘制手绘草图以匹配获批规划中的手绘原稿。 "Plan_mapped_land_use"要素类字段说明： Plan_Name：规划名称 Plan_Type：规划类型（例如社区规划） Plan_Num：规划编号 LU_DES：土地用途标识（例如低密度住宅区） LISTED_ALLOWABLE_ZONES：规划中列明的允许分区 LISTED_RAC_MIN：规划中列明的每英亩最低住宅户数（如适用） LISTED_RAC_TARGET：规划中列明的每英亩目标住宅户数（如适用） LISTED_RAC_MAX：规划中列明的每英亩最高住宅户数（如适用） LISTED_FAR_MIN：规划中列明的最低建筑面积比（Floor Area Ratio, FAR，如适用） LISTED_FAR_TARGET：规划中列明的目标建筑面积比（如适用） LISTED_FAR_MAX：规划中列明的最高建筑面积比（如适用） BUILDING_HEIGHT_MAX：依据规划政策确定的最大建筑高度（单位：英尺） 重要提示：本数据为非官方数据，请注意相关免责声明。 URL：统一资源定位符（Uniform Resource Locator, URL） IMPLIED_ALLOWABLE_ZONES：规划中未列明的推导允许分区 IMPLIED_RAC_MIN：规划中未列明的推导每英亩最低住宅户数（如适用） IMPLIED_RAC_TARGET：规划中未列明的推导每英亩目标住宅户数（如适用） IMPLIED_RAC_MAX：规划中未列明的推导每英亩最高住宅户数（如适用） IMPLIED_FAR_MIN：规划中未列明的推导最低建筑面积比（如适用） IMPLIED_FAR_TARGET：规划中未列明的推导目标建筑面积比（如适用） IMPLIED_FAR_MAX：规划中未列明的推导最高建筑面积比（如适用） IMPLIED_LU_CATEGORY：规划中未列明的推导通用土地用途类别，通用类别包括住宅、办公、商业、工业及其他。 用途 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 数据集分类等级0 - 公开已知用途 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 已知错误 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 数据联系人：John Beall，图森市发展服务部，电话：520-791-5550，邮箱：[e-mail] 更新频率 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.