DataSet Saltin et al 2025 A parametric finite element model of leg campaniform sensilla in Drosophila to study CS location and arrangement

ReadMe .7z (ZIP) archive by Dr. Brian D. Saltin for "A parametric finite element model of leg campaniform sensilla in Drosophila to study CS location and arrangement" in J. R. Soc. Interface by Brian D. Saltin, Clarus Goldsmith, Moritz Haustein, Ansgar Büschges, Nicholas S. Szczecinski, Alexander Blanke. If no other/further restrictions apply (eg. COMSOL licence link below, MathWorks license - both license agreements provided as copy) all is CC-BY 4.0 https://cdn.comsol.com/doc/6.0.0.405/COMSOL_SoftwareLicenseAgreement.pdf MathWorks, COMSOL, and their licensors shall be explicitly excluded from liability for damages or remedies; there is no warranty for any program/file; Removal of any copyright, trademark, logo, proprietary rights, disclaimer or warningnotice included on or embedded in any part is prohibited. This dataset consists of two folders one holding the COMSOL 5.6 model files and 3 CAD files of the geometry (Supplemetery3D), the other the matlab code and raw data as exported from COMSOL to csv files (RawData_AND_Code). The rationale behind the duplication of COMSOl fiels and dat.csv's in conjuntion with CAD files is to make it as accessible as possible without a COMSOL license. A dedicated ReadMe for the matlab code and raw data can be found inside the code folder,which in principle contains the interdependet matlab files and their respective raw data. The code as provide constituted the full analysis minus aesthetic changes more easilydone in layout soft wear. Supplemetary3D contains: Supplementary 1: CAD files of an individual CS Supplementary 2: CAD files of full femoral field Supplementary 3: CAD files of the completely assembled model. Supplementary 4: ZIP of COMSOL files of the parametrized model as used in the present study.