CCS_Permits

Display – This is the address of the property, the permit was issued for APN – The Assessor’s Parcel Number (APN) is a unique number assigned by the Assessor to each parcel of land in the County. Longitude – The Longitudinal axis point for the permit’s property address. This is for mapping Latitude – The Latitudinal axis point for the permit’s property address. This is for mapping Neighborhood Desc- The City neighborhood the permit’s property is located Wards – The City ward that the permit’s property is located ApplicantName – The name of the contractor/ owner who pulled the permit for the property PermitNumber – The system generated permit number for the properties specific permit. Each permit number is unique DwellingUnitNew – the number of residential units added to the city with the issuing of permit DwellingUnitEliminated - the number of residential units eliminated in the city with the issuing of permit PermitType – The type of work/trade the permit is approving OccupancyType – The type of residence the permit has been pulled for (SFD- Single Family Dwelling, TFD – two family dwelling/ three family dwelling) WorkType – defines what type of work the permit approves within the chosen trade Status – shows where in the life cycle of the permit it is. (Review, fees, issued, closed/canceled) Milestone – Milestone is the more specific step the permit is at within a given status Value – The total value of the permit, derived from the submitted scope of work Totalfees – the cost of the permit type, City Fees, Taxes that combine to the total fee Comments – this is the scope of work that was submitted with the permit. It tells you what the requested work to be approved is IssueDate – this is the date the permit has passed reviews, and the fees have been paid. Once the fees are paid, the permit is issued and work can begin CompleteDate – the date the final inspection has been completed and passed. The permit will automatically move to closed status FullName – the name of the property owner where the permit was pulled ApplicantAddress – the address of the permit applicant ApplicantCity – the City of the applicant The construction permits are separated by Permit Types. The Different trades and their types are: Building Permits: Res – These will be the single and two family dwellings or condos. The permits can be anything from a new residence built up from the foundation to new windows/doors. Commercial – This will be work for commercial use properties. Examples are apartment buildings, schools, office spaces. Site – This is footing and foundation work on commercial projects Wrecking – This is the permit needed to demolish a building in the City. Plumbing Permits: Plumbing – These permits are for installation or alteration of plumbing systems. This is anywhere from pipes to meter moves Mechanical Permits: Mechanical – this is for installation or alteration of mechanical systems. This is anywhere from replacing a furnace to vents.Display：物业地址，本许可证据此核发。 APN（评估宗地编号，Assessor’s Parcel Number）：县评估部门为辖区内每宗土地分配的唯一标识码。 Longitude：本许可证对应物业地址的经度坐标，用于地图绘制。 Latitude：本许可证对应物业地址的纬度坐标，用于地图绘制。 Neighborhood Desc：本许可证对应物业所属的城市社区。 Wards：本许可证对应物业所属的城市选区。 ApplicantName：申领该物业许可证的承包商或业主姓名。 PermitNumber：系统为该物业专属许可证生成的唯一编号，每一个许可证编号均唯一。 DwellingUnitNew：核发本许可证后，本市新增的住宅单元数量。 DwellingUnitEliminated：核发本许可证后，本市减少的住宅单元数量。 PermitType：本许可证批准的作业或行业类型。 OccupancyType：本许可证申领所针对的住宅类型（SFD-独栋住宅（Single Family Dwelling）、TFD-双户/三户住宅（two family dwelling/ three family dwelling））。 WorkType：定义本许可证在选定作业类别下批准的具体作业类型。 Status：显示许可证所处的生命周期阶段，包括审核、缴费、已核发、已关闭/已撤销。 Milestone：许可证在对应阶段下的更细分执行步骤。 Value：本许可证的总价值，基于提交的作业范围核算得出。 Totalfees：许可证类型费用、市政费用及税费的总和，即总缴费金额。 Comments：随许可证提交的作业范围说明，用于明确申请获批的作业内容。 IssueDate：许可证通过审核且费用缴清的日期，缴费完成后许可证正式核发，即可启动作业。 CompleteDate：最终验收完成且合格的日期，此后许可证将自动变更为已关闭状态。 FullName：申领许可证的物业所有人姓名。 ApplicantAddress：许可证申请人的联系地址。 ApplicantCity：许可证申请人所在城市。 本建筑许可证按许可证类型分类，不同作业类别及其类型如下： 1. 建筑许可证（Building Permits）： - 住宅类（Res）：涵盖独栋、双户住宅或公寓单元的相关工程，作业范围可涵盖从地基新建住宅到门窗更换等各类项目。 - 商业类（Commercial）：针对商业用途物业的作业，例如公寓楼、学校、办公场所的建设或改造工程。 - 场地类（Site）：商业项目的地基与基础工程。 - 拆除类（Wrecking）：本市范围内拆除建筑物所需的专用许可证。 2. 管道许可证（Plumbing Permits）： - 管道类（Plumbing）：用于管道系统的安装或改造，涵盖管线更换、水表移位等各类管道相关作业。 3. 机械许可证（Mechanical Permits）： - 机械类（Mechanical）：用于机械系统的安装或改造，涵盖更换熔炉、通风管道安装等各类机械相关作业。