John Elliot (2010) CIL:7867, Mus musculus, permanent cell line cell. CIL. Dataset

This is part of a triplicate data set of non-overlapping fields of NIH 3T3 fibroblasts cultured on polystyrene. Each set is indicated by the well number. Each image contains 4 images of each field as a time series. The first image is the phase contrast image. The second image channel is Tenascin-C promoter driven destabilized EGFP reporter vector. The third image is Texas Red C2-maleimide (to stain cell body), and the fourth image is Dapi (to stain nuclei).

Images were collected on a Zeiss Axiovert 100. The samples were viewed with a Zeiss A-plan 10x Ph1 0.25 NA objective and recorded with a CoolSnapFX camera using 2 x 2 binning. The filters were as follows: 1.) A custom dichroic multipass beam splitter optimized for imaging DAPI, EGFP and TxRed (part# BS51019+400dclp, Chroma Technology, VT); 2.) DAPI excitation filter-360/40 nm; 3.) DAPI emission filter-460/50 nm; 4.) EGFP excitation filter-470/40 nm; 5.) EGFP emission filter-525/50 nm; 6.) TxRed excitation filter-568/24 nm; 7.) TxRed emission filter-630/60 nm. Autofocus on the TxRed color channel was performed at each location before the series of images were collected.

Protocol: The cells were seeded on TCPS dishes at ~1000 cells/well during a passage cycle. The test cultures were incubated overnight before being rinsed with PBS and then fixed with 300 uM m-maleimidobenzoyl-N-hydroxysuccinimidyl ester (MBS) in microtubule stabilizing buffer (MTSB) composed of 4% (w/v) polyethylene glycol (PEG) 8000, 100 mM 1,4-piperazinediethanesulfonic acid (PIPES),10 mM ethylene glycol-bis(2-aminoethylether)-N,N,N’,N’-tetraacetic acid (EGTA), pH 6.9 for at least 16h at RT. The fixative was removed and solution of 0.05% Triton X100 in PBS containing 10 ng/mL of Tx Red C2-maleimide and 2 ng/mL DAPI for 2h. The staining solution was removed, cells were rinsed with PBS/3% BSA, and 0.05% sodium azide and PBS. A 50% glycerol/10 mM Tris, pH 8.0 containing 2ng/mL DAPI and 0.9g/l 1,4-diazobicyclo[2,2,2]octane (DABCO) as an antifade reagent was then added to each well for imaging purposes. The bottom of the wells were wiped with 70% ethanol wipe and then a dry wipe before imaging.

Purpose: The purpose of the dataset was to measure the distribution of EGFP fluorescence intensities within individual cells in the population. Using the image sets collected, a plugin for ImageJ was used to perform the following image analysis tasks. 1.) The Txred images (which is a general purpose cell body stain) were segmented by manual thresholding. 2.) The resulting mask was used to define cell ROIs on the DAPI and EGFP images. 3.) The number of nuclei in each ROI is determined from the DAPI image and the integrated intensity of the EGFP signal in the cell is determined from ROI in the EGFP image. 4.) A local background intensity around each cell in the EGFP image is determined by dilating the ROI by 3 pixels and determining the pixel intensities in only the 3 pixel dilation area. When this data is placed in a spread sheet, you can use the results to identify cell clusters (i.e. have more than 1 nuclei), debris or partial cell (i.e. no nuclei), poor EGFP/cell measurements (i.e. high background intensity). The spreadsheet can be used to measure the distribution of EGFP cell intensities within a population of cells. The phase images were collected as quality control and validation data. The phase images provide a human validation mechanism if there are questions about the staining and/or fluorescence detection in an image.

References: 1. Langenbach, K.J., Elliott, J.T., Tona, A., and Plant, A.L. (2006) Evaluating the correlation between fibroblast morphology and promoter activity on thin films of extracellular matrix proteins. BMC-Biotechnology 6(1):14. 2.Elliott, J.T., Halter, M., Woodward, J.T., Langenbach, K.J., Tona, A., Plant, A.L. (2008) Evaluating the performance of fibrillar collagen films formed at polystyrene surfaces as cell culture substrates. Biointerphases. 3(2):19-28.

本数据集为NIH 3T3成纤维细胞在聚苯乙烯上培养的非重叠区域的三份复制品之一。每个样本通过孔号进行标识。每个图像包含该区域的四个连续时间序列图像。首张图像为相位对比图像，第二通道为受Tenascin-C启动子驱动的EGFP报告基因载体驱动的去稳定化图像，第三图像为Texas Red C2-马来酰亚胺（用于染色细胞体），第四图像为Dapi（用于染色细胞核）。图像采集于Zeiss Axiovert 100显微镜，使用Zeiss A-plan 10x Ph1 0.25 NA物镜进行观察，并利用CoolSnapFX相机以2 x 2合并方式记录。过滤器配置如下：1.定制二向色多通道分束器，针对DAPI、EGFP和TxRed成像优化（部件号BS51019+400dclp，Chroma Technology，VT）；2.DAPI激发滤光片-360/40 nm；3.DAPI发射滤光片-460/50 nm；4.EGFP激发滤光片-470/40 nm；5.EGFP发射滤光片-525/50 nm；6.TxRed激发滤光片-568/24 nm；7.TxRed发射滤光片-630/60 nm。在采集图像系列之前，对TxRed颜色通道进行自动对焦。实验方案：细胞在TCPS培养皿中以约1000个细胞/孔的密度接种于传代周期中。测试培养物在过夜孵育后用PBS清洗，然后用含有4%（w/v）聚乙二醇8000、100 mM 1,4-哌嗪二乙烷磺酸（PIPES）、10 mM乙二醇双（2-氨基乙基）乙二醇四乙酸（EGTA），pH 6.9的微管稳定化缓冲液（MTSB）中的300 uM m-马来酰亚胺苯甲酰-N-羟基琥珀酰亚胺酯（MBS）固定至少16小时。移除固定剂，用含有10 ng/mL Tx Red C2-马来酰亚胺和2 ng/mL Dapi的0.05% Triton X100在PBS中的溶液固定2小时。移除染色溶液，细胞用PBS/3% BSA和0.05%叠氮化钠及PBS清洗。然后向每个孔中加入含有2 ng/mL DAPI和0.9g/l 1,4-二氮杂双环[2,2,2]辛烷（DABCO）作为抗褪色剂的50%甘油/10 mM Tris，pH 8.0的溶液，以便进行成像。在成像前，使用70%乙醇擦拭孔底，然后进行干燥擦拭。目的：本数据集旨在测量单个细胞群体中EGFP荧光强度的分布。利用采集到的图像集，通过ImageJ插件执行以下图像分析任务：1.手动阈值分割Txred图像（作为通用细胞体染色）；2.使用所得掩码在DAPI和EGFP图像上定义细胞感兴趣区域（ROI）；3.通过DAPI图像确定每个ROI中的核数量，并通过EGFP图像中的ROI确定细胞中EGFP信号的积分强度；4.通过将ROI膨胀3个像素并确定仅在该3个像素膨胀区域内的像素强度，确定EGFP图像中每个细胞周围的局部背景强度。将此数据放入电子表格中，可以使用结果来识别细胞簇（即具有多于1个核的细胞）、碎片或部分细胞（即无核细胞）、EGFP/细胞测量不良（即高背景强度）。电子表格可用于测量细胞群体中EGFP细胞强度的分布。相位图像作为质量控制和数据验证而采集。相位图像提供了对图像中染色和/或荧光检测的直观验证机制。参考文献：1. Langenbach, K.J.，Elliott, J.T.，Tona, A.，Plant, A.L.（2006）在细胞外基质蛋白薄膜上评估成纤维细胞形态与启动子活性的相关性。BMC-Biotechnology 6(1):14。2.Elliott, J.T.，Halter, M.，Woodward, J.T.，Langenbach, K.J.，Tona, A.，Plant, A.L.（2008）评估在聚苯乙烯表面形成的纤维状胶原蛋白薄膜作为细胞培养基质的性能。Biointerphases 3(2):19-28。