Estimated Component Values for Pierce Oscillator Circuit at Room Temperature

This dataset describes the measured or calculated values of most components shown in the Dataset Image. These components were used to accurately model a Pierce oscillator circuit for RT operation. Each bond wire (W1, W2, etc.) is represented by a series resistance and inductance placed parallel with a capacitor, all calculated based upon the length of the wire. Each inconel and standard coaxial cable (CI1-2 and CO1-2) is represented with the same three components. The inductance and capacitance being calculated based upon measured cable length and the series resistance being measured using a standard multimeter. Each inductor (L1 and L2) is represented by an inductance, series resistance, and parallel capacitance all measured using an LCR meter. Each ground plane section (T1, T2, etc.) is represented by a series resistance based upon sheet resistance per square. Sheet resistance was estimated by measuring resistance over long rectangular sections of ground plane using a multimeter.