Image Restoration - STED-FM

This datasets provides two datasets to train a denoising model.

VGAT

We acquired pairs of noisy and clean STED images on our Abberior Infinity line microscope, a different microscope than the one used for the generation of the STED-FM dataset. The Vesicular Inhibitory Amino Acid Transporter (VGAT) was stained with Atto490LS. The noisy and clean STED image acquisition only differed in the number of accumulation: 1 accumulation for the noisy image and 10 accumulation for the clean STED. The pixel dwell time was set at 10µs, the excitation power at 4.2µW (488 nm), and the STED depletion power at 88.1mW (775 nm). Laser power is measured at the back aperture of the objective lens. We registered the noisy image on the cleaned version with translation using the SimpleITK library. Images were then cropped to 224x224 pixels for training. 

Gephyrin

We acquired pairs of noisy and clean STED images on our Abberior Infinity line microscope, a different microscope than the one used for the generation of the STED-FM dataset. Gephyrin was stained with STAR RED. The noisy and clean STED image acquisition only differed in the number of accumulation: 1 accumulation for the noisy image and 10 accumulation for the clean STED. The pixel dwell time was set at 10µs, the excitation power at 15.4µW (640 nm), and the STED depletion power at 88.1mW (775 nm). Laser power is measured at the back aperture of the objective lens. We registered the noisy image on the cleaned version with translation using the SimpleITK library. Images were then cropped to 224x224 pixels for training.

Method

STED imaging | Super-resolution imaging was performed using an Abberior INFINITY STED microscope (Abberior Instruments GmbH, Germany). The system was equipped with a 60x oil immersion objective lens (NA 1.42; Olympus UPLXAPO60XO), a motorized stage, and adaptive optics with spherical aberration correction ranging from 0 to 0.30 during imaging. Wavelengths of 485nm and 640nm were used for the experiment. The system is equipped with a 775 nm depletion laser (40 MHz, 1.2 ns pulse duration; MPB Communications). All lasers were operated at 40MHz. The emitted fluorescence photons were detected by avalanche photodiode detectors (APDs) through a pinhole set at approximately 0.81 Airy unit. Emission from ATTO 490LS and STAR RED was collected using a tunable detection filter with a bandwidth of 650–755 nm. The acquired images were visualized and processed using the FIJI software (ImageJ, version 1.54p). 

Acute brain slices preparation | All animal procedures were conducted in accordance with the guidelines of the Animal Protection Committee of Université Laval. C57BL/6 mice (Charles River Laboratories, Kingston, NY) were sacrificed by intracardiac perfusion. Animals were first anesthetized via intraperitoneal injection of a 20% urethane solution. Residual blood was then washed out by intracardiac perfusion with ice-cold PBS, followed by perfusion with a hybrid fixative solution containing paraformaldehyde (PFA) and glyoxal, based on a solution described by Yao et al. [1] (4% PFA, 0.4% glyoxal, 0.1% methanol in PBS). Brains were collected and post-fixed in the same solution for 24 hours. Brains were collected and post-fixed in the same solution for 24 hours. Tissue was then sectioned into 40-µm-thick slices using a vibratome. Finally, slices were cryopreserved at −20 °C in a cryopreservation solution until use.

Staining procedure | Brain slices were washed in PBS containing 0.1 M glycine, then permeabilized and blocked for 30 minutes in PBS (20 mM) containing 0.2% Triton X-100 and 2% normal goat serum. Slices were incubated overnight at 4 °C on a shaker with VGAT (Synaptic Systems, rabbit, Cat. No. 131 003) diluted in blocking solution (1:500).  The following day, slices were incubated for 2 hours at room temperature on a shaker with goat anti-rabbit ATTO 490LS secondary antibody (Hypermol, Cat. No. 2309-1MG) and a gephyrin antibody fluorescence-labeled with abberior STAR RED (Synaptic System, mouse, Cat. No. 147 011AbRED) diluted in blocking solution (1:250 and 1:500, respectively). Slices were washed with PBS between immunostaining steps to wash out unbinded antibodies. Finally, the slices were mounted in PVA with DABCO for imaging.