Raw data used for: "Ignition and combustion study of premixed ammonia using GDI pilot injection in CI engine"

This is the data used for the results in the paper "Ignition and combustion study of premixed ammonia using GDI pilot injection in CI engine" (Førby et al, 2022, Fuel). 
 https://doi.org/10.1016/j.fuel.2022.125768 

Experiments: 
In the experiments, premixed ammonia was ignited using a pilot fuel in a CI-engine. The pilot fuel was injected with a GDI nozzle. Very small pilot fuel sprays were used succesfully to ignite the ammonia.

The data available here is the in-cylinder pressure pick-up traces -- collected with LabView-software -- and overviews of the corresponding test conditions. 

The data can be loaded and used with Open-Source software freely available through e.g. Python.

Please consult the ReadMe-file for using the data.  

For any questions or enquiries, please contact: [e-mail]

本数据集为论文《采用CI发动机GDI预喷射对预混氨的点火与燃烧研究》(Førby 等人，2022年，Fuel)中所述结果的实验数据。

实验部分：在实验中，通过在CI发动机中使用预喷射燃料点燃了预混氨。预喷射燃料通过GDI喷嘴注入。成功利用极小的预喷射燃料喷雾点燃了氨。

本数据集包含的为气缸压力采集曲线，这些曲线使用LabView软件收集，并附有相应的测试条件概览。

数据可使用Python等开源软件自由加载和使用。

请参阅ReadMe文件以了解数据的使用方法。

如有任何疑问或咨询，请联系：[e-mail]