Data repository for An integral surface tension scheme for three-dimensional front tracking frameworks, Part 2 of 2

Data repository for the paper An integral surface tension scheme for three-dimensional front tracking frameworks, Part 2 of 2 Corresponding email: [e-mail] This repository contains the second part of the data for the paper "An integral surface tension scheme for three-dimensional front tracking frameworks" by Gabriele Gennari and Berend van Wachem. The data stored in this repository has the following format: - .txt files contain the raw data used for the plots in the validation section of the paper.- .h5 files contain the fields data for all the simulations (the results can be visualised with the open-source software Paraview or with similar tools).- .xmf files contain the XDMF descriptors for the fields data and are required for visualisation with Paraview.- .gnuplot files contain the gnuplot scripts to reproduce the plots from the raw data contained in the .txt files. The main folders of this repository are named as the paragraphs in the validation section of the paper. Within the main folders, sub-folders contain the raw data for the specific simulations. The naming style of the raw data files and the sub-folders is explained in the following. 4.5_Rising_bubbles:The folders are named with the corresponding surface tension scheme (i.e., ClassicFT, CSF and Integral), and each folder contains three folders named Mo_848, Mo_41.1 and Mo_1.31 for the cases with Morton numbers 848, 41.1 and 1.31, respectively. Based on the mesh resolution, each simulation folder is named Run1 or Run2 for 16 cells/D and 32 cells/D, respectively. Note that both Run1 and Run2 are available only for the Mo_848 cases; the Mo_41.1 and Mo_1.31 cases contain only Run2.In each simulation folder:- the folder Results contains the fields data- the file output.txt has the format "%f, %f\n" and contains the non-dimensional time and U_bThe script plot_mesh_sensitivity.gnuplot in the main folder reproduces the plot in Figure 18The script plot.gnuplot in the main folder reproduces the plot in Figure 19 This project has received funding from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), grant numbers 420239128 and 458610925.