Kite power flight data acquired on 8 October 2019

For this specific test, the 25m² leading-edge inflatable V3 kite was flown, which was also used by Oehler in 2017 (https://doi.org/10.5194/wes-4-1-2019) but with a different measurement configuration. The kite was equipped with a newly designed flow measurement setup to replace the less robust measurement setup of Oehler. Conservative operational settings were used, as the test focused on data acquisition rather than maximizing energy production. Therefore, the power output during the test was lower than that for normal operation. Additionally, the system configuration was already outdated at the time of the test and has undergone substantial development since then; for example, Kitepower now employs a much larger kite with an improved design.<br>The measurements were performed using the 100 kW technology development platform of Kitepower B.V., a spin-off company from the Delft University of Technology. For this particular test flight, the kite power system was equipped with a Leading Edge Inflatable (LEI) V3 kite. The traction force was transferred to the ground station by a tether made of Dyneema. A general description of the kite power system is given in the work of Van der Vlugt and Salma.