3D model of a beaded rim basin from Hauskirchen grave 13

3D scan of a beaded rim basin from Hauskirchen grave 13. It is made of brass and very poorly
preserved. The basin has a wide base without standing ring, a tub-shaped vessel body and
a horizontally projecting rim section with bosses pressed out from below. The semi-circular cracked base is
held together by two strips of bronze sheet metal attached to the
outside with bronze rivets sitting on the outer rims, on the floor and
rising wall. Six other cracks are repaired by smaller bronze sheets with
bronze rivets, two of which are attached on the outside and four on the
inside. The horizontally everted rim is patched in two places by angled
bronze sheets and bronze rivets from the outside, in two places also
the somewhat repointed rim adjacent to the bosses. The maximum diameter is 42.9 cm and the height is 12.5 - 13.0 cm.

Hauskirchen墓地13号墓葬出土的珠边盆3D扫描图像。该盆由黄铜制成，保存状况极为不佳。盆底宽广，无立环，器身呈桶状，边缘水平外凸，底部压印有凸起。半圆形的破裂底部由两片青铜薄板通过在外侧铆接的青铜铆钉与地面及升高墙壁固定。另外六处裂缝则由更小的青铜薄片及铆钉修复，其中两片在外侧固定，四片在内侧固定。水平外翻的边缘在两处由成角度的青铜薄片和铆钉修补，在靠近凸起的边缘处，也修复了略微锐化的边缘。最大直径为42.9厘米，高度在12.5至13.0厘米之间。