Data used to create Figure 10 in the article "Nanoparticle interferometer by throw and catch"
收藏资源简介:
Release and Re-Capture Experiment Data Data used to create Figure 10 in the "Nanoparticle Interferometer by Throw and Catch" paper: Wardak, J.; Georgescu, T.; Gasbarri, G. Nanoparticle Interferometer by Throw and Catch. Atoms 2023, 1, 0 (accepted in press). Nanoparticle was trapped and cooled, then taken down to low pressure. Function generator sent a signal to EOM which turned off the trap for 50 microseconds and simultaneously triggered the oscilloscope which saved the data. C4-XX-00008.trc is the data from the photodetector that was collecting light scattered by the particle. C2--XX--00008.trc was the signal sent to the oscilloscope directly from the function generator. Note: the signal sent from the function generator to the oscilloscope had a delay relative to the signal sent to the EOM, this was corrected in the data analysis. To correct: shift all data from particle forward by 25 microseconds or the pulse back by 25 microseconds.



