bearing fault sound singal.zip

The data was collected on a comprehensive mechanical fault simulation test bench of type MFS-MG2010. A pickup with a sampling frequency of 44.1 kHz was used to collect the fault state noise signals of the bearing in four different state modes: normal, ball fault, inner ring fault, and outer ring fault at a motor speed of 1800 rpm.

本数据集采集自型号为MFS-MG2010的综合机械故障模拟试验台。实验采用采样频率为44.1 kHz的拾音器，在电机转速为1800转每分钟的工况下，采集了轴承处于四种不同状态模式下的故障噪声信号，包括正常状态、滚珠故障、内圈故障以及外圈故障。

搜集汇总

背景与挑战

背景概述

该数据集包含轴承在四种不同故障状态下的声音信号，采样频率为44.1 kHz，适用于轴承故障诊断和信号处理研究。